X-ray Fluorescence Spectrometer T-S211XFS

Introduction

X-ray Fluorescence Spectrometer features precise multi-element compositional analysis for laboratories. Measures elements from Fluorine to Uranium with concentrations ranging PPM percent levels. Automatic irradiation area switching and selectable filters ensure fast accurate elemental detection. High stability FAST-SDD detector. delivers reliable results with excellent resolution performance consistency. Supports solids powders liquids pellets using air vacuum helium atmospheres for analysis. Spectrometer is equipped with integrated software providing automated calibration data processing with multi-element regression and corrections tools. 

Applications

The X-ray Fluorescence Spectrometer is widely used for rapid and accurate elemental analysis across industrial and laboratory environments. It supports qualitative and quantitative determination of elements in metals, alloys, minerals, cement, chemicals, powders, liquids, and solid samples. The system is suitable for quality control, material verification, research applications, and environmental sample analysis, providing reliable results for both routine testing and advanced analytical studies.

Specifications

Element Range	Fluorine (F) to Uranium (U)
Concentration Range	PPM to 100%
Sample Types	Solids, Liquids, Powders
Detector Type	Electrically Cooled FAST SDD
Detector Window	1 μm Ultra-thin Carbon Window
Detector Resolution	Typical 123 eV
Output Count Rate	3000 KCPS
Peak-to-Back Ratio	≥ 25000 : 1
Peak-to-Tail Ratio	> 1800
X-ray Tube Type	Imported High-Power End Window
Tube Voltage	0-50 kV Adjustable
Tube Current	0-4000 μA Adjustable
X-ray Tube Power	50 W
Tube Stability	0.2% after 8 hours
High Voltage Generator Output	50 kV, 0-4 mA
Generator Stability	0.05% over 8 hours
Sample Handling	Automatic Robotic Injection
Sample Capacity	30 + 1 Emergency Sample
Sample Measurement Mode	Spinning Sample Detection
Measurement Atmosphere	Air / Vacuum
Temperature Control	Adaptive Constant Temperature
Safety Design	Lead Shielding with Interlock
Control System	Siemens PLC Control Module
Vacuum Detection	Pirani Type Vacuum Gauge
Calibration Method	Permanent Standard Calibration
Standard Curves	Multiple Imported Standards
ADC Resolution	16-bit
Display	24-inch Color Monitor
Storage	512 GB SSD
Operating Temperature	5 - 30 °C
Relative Humidity	≤ 80%
Power Supply	220 V ±10%, 50 Hz
Dimensions (W×D×H)	800 × 700 × 1400 mm
Weight	150 kg

Features

Wide Element Range

Automatic Calibration

High Spectral Resolution

Multi-Atmosphere Analysis

Intelligent Software Control

FAQ

Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.

Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.

Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.

Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.

Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.