Energy Dispersive X-Ray Fluorescence Spectrometer T-S220EDX

Introduction

Energy Dispersive X-Ray Fluorescence Spectrometer is an advanced testing system for environment compliance testing. Within the range of 1 ppm to 99.99%, it features an elemental analysis spanning from Na to U. The device uses a vacuumizer to ensure better response to environmental directives. Integrated SDD testing system improves accuracy of the detection. Streamlined body with the Si-pin detector elevates data analysis accuracy.

Applications

Energy Dispersive X-Ray Fluorescence Spectrometer is used environmental compliance testing across electronics manufacturing, production, recycling and waste management, automotive industries, etc.

Specifications

Elemental Analysis Range	From Na to U
Analytical range	1 ppm to 99.99%
Operating temperature	15 to 30 ℃
Relative humidity	40% to 50%
Measuring time	100 to 300 seconds (Adjustable)
ROHS directive rules	Limited detection up to 1 ppm
Energy resolution	149 ± 5 EV
SDD Electrical Cooled Detector distinguishability	129 ± 5 e electron volt
Filament Current Maximum Output	1 Ma
Half Loss Component	Service life > 20,000 hours
Maximum Output Voltage	50 kV
Vacuum Pumping System	Low vibration, low noise, self-protection, fast pumping speed
Geometric Pumping Speed of vacuum system	60 L/min
Ultimate Pressure of vacuum system	6.7 × 10^ -2 Pa
Power Supply	AC 220 V ± 5 V
Packaging Dimension	580 × 550 × 400 mm
Weight	80 Kg

Features

One-click automatic testing for user’s convenience

Multiple anti-radiation leak design for safety

Professional ROHS testing software

Energy Dispersive X-Ray Fluorescence Spectrometer requires low maintenance

USB 2.0 interface for efficient data transmission

FAQ

Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.

Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.

Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.

Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.

Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.