Introduction
A Bacti Cinerator sterilizer, also called the microincinerator, is a laboratory device used for the sterilization of the inoculation loops and the needles by the incineration, and it is used in the microbiology, the clinical, the food, the research, and the many other laboratories. The Bacti Cinerator sterilizer consists of a heating element, which is embedded in a ceramic or a quartz tube, a power supply, and a base, and it heats the tube to the high temperatures, typically 800 degrees Celsius and above, and the loop or the needle is inserted into the tube for a few seconds, which incinerates the microorganisms on the surface, providing a rapid and a flameless sterilization; the Bacti Cinerator sterilizer is used for the sterilization of the inoculation loops and the needles before and after the inoculation, for the sterilization of the small instruments, for the aseptic techniques in the microbiology, and for many other applications, and it is available in various models, with the different tube sizes and the temperatures; the Bacti Cinerator sterilizer provides a safe and a convenient sterilization, without the open flame, and it is an essential instrument in the microbiology laboratory. Bacti Cinerator sterilizers are used in the microbiology laboratories, in the clinical laboratories, in the food laboratories, in the research, and for many other applications. With their incineration, Bacti Cinerator sterilizers are essential for the loop sterilization.
Bacti-Cinerator Sterilizer T-S212BCNS
Bacti-Cinerator Sterilizer reaches a high temperature of 825 °C, enabling rapid and efficient sterilization. It features a smart heating system for consistent and long-term reliability...
Bacti-Cinerator Sterilizer T-S213BCNS
Bacti-Cinerator Sterilizer operates up to 825 °C, providing effective sterilization of inoculating loops and needles. It includes a podzolic organics layer, minimizing contamination an...
Bacti-Cinerator sterilizer T-S211BCNS
Bacti-Cinerator sterilizer is an easy to use table top sterilizing unit that use IR heat for organic material incineration. Sterilization takes 5 to 7 seconds at an optimum sterilizing te...
Bacti-Cinerator sterilizer T-S220BCNS
Bacti-Cinerator sterilizer is an easy to use table top sterilizing unit that use IR heat for organic material incineration. Sterilization takes 5 to 7 seconds at an optimum sterilizing te...
Bacti-Cinerator sterilizer T-S221BCNS
Bacti-Cinerator sterilizer is an easy to use table top sterilizing unit that use IR heat for organic material incineration. Sterilization takes 5 to 7 seconds at an optimum sterilizing te...
Bacti-Cinerator sterilizer T-S210BCNS
Bacti-Cinerator sterilizer is an easy to use table top sterilizing unit that use IR heat for organic material incineration. Sterilization takes 5 to 7 seconds at an optimum sterilizing te...
Standards
IEC 61010-2-040:2020-Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
ISO 17665-1:2006-Sterilization of health-care products-Moist heat-Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
Complies with the above standards, but is not limited to them.
Features
1. Bacti-cinerator sterilizer for instant sterilization of inoculation loops and needles.
2. High-temperature ceramic heating element reaches sterilization temperature within seconds.
3. No open flame provides safe operation in biological safety cabinets and laminar flow hoods.
4. Suitable for microbiology laboratories, clinical labs and cell culture facilities.
5. Compact design with stainless steel body and adjustable angle for comfortable use.
FAQ
Q1: What testing scenarios is this sterilizer mainly applied to?
A: The bacti-cinerator sterilizer is used in microbiology laboratories, clinical diagnostic labs, cell culture facilities and educational institutions for instant sterilization of inoculation loops, needles and small metal tools during aseptic procedures. It supports bacterial culture transfer, streak plating, sample inoculation and other aseptic techniques where rapid sterilization between samples is required. The flameless design eliminates the safety hazards of open Bunsen burners in biological safety cabinets and laminar flow hoods, making it suitable for use in controlled environments where open flames are prohibited.
Q2: What standards does the sterilizer comply with?
A: The sterilizer is designed with reference to IEC 61010 laboratory electrical safety standards and relevant GB standards for laboratory sterilization equipment. Microbiological applications follow internal aseptic technique protocols and biosafety guidelines. Sterilization effectiveness should be verified periodically for critical applications.
Q3: What is the warranty period for the whole machine and key components?
A: The whole sterilizer is covered by a 12-month warranty. The heating element, controller and body are covered, while the ceramic insert is a consumable excluded from warranty. Damage from dropping, liquid ingress or unauthorized repair is excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation is simple: power on, allow heating to temperature and insert the loop for several seconds. No professional training is required beyond basic aseptic technique. Users should allow adequate heating time and avoid touching the hot ceramic insert during operation.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: No metrological calibration is required. Sterilization effectiveness can be verified periodically using biological indicators or visual inspection of the heating element. The ceramic insert should be replaced when degraded or contaminated.
Q7: Are supporting consumables universal? What about the long-term procurement cost?
A: The ceramic insert is available from the supplier or authorized distributors. There are no other recurring consumables. Long-term ownership cost is very low for a benchtop sterilizer.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes voltage, insert size and branding. Additional ceramic inserts and stands can be ordered separately. Minimum order quantities apply for custom versions.
Q9: Does the purchase include on-site installation and commissioning service?
A: No installation is required beyond power connection. The package includes the sterilizer and instruction manual. On-site service is not included for standard orders.
Q10: What types of samples are compatible with this equipment?
A: The sterilizer is designed for metal inoculation loops, needles and small heat-resistant tools. It should not be used for plastic, glass or non-heat-resistant items. Loops should be cooled briefly before touching cultures to avoid killing microorganisms. The instrument is not suitable for sterilizing large items or liquids.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.