Introduction
Optical emission spectrometer is a tabletop high performance spectrometer with a wavelength range of 130 nm to 800 nm. Low operating cost for metal analysis and saves energy by 50%. Based on CMOS technology and contains full spectrum characteristics of CCD spectrometer with extremely low detection limit for non-metallic elements.
Applications
Used for metal and trace elemental analysis, foundry, mechanical engineering, scientific research, product inspection, automobile, petrochemical engineering, shipbuilding, electrics, aerospace, nuclear power, metallic and nonferrous metallic smelting, processing and recycling.
Specifications
| Wavelength range | 130 nm ~ 800 nm |
| Focal length | 400 mm |
| Grating line | 2400 m1 / mm |
| First order spectral line dispersion rare | 1.2 nm / mm |
| Average resolution ratio | 10 pm / pixel |
| Spark frequency | 100 Hz ̴ 1000 Hz |
| Discharge current | 1 A - 400 A |
| Power | AC 220 V 50 HzAC 220 V 60 Hz |
| Power consumption | Maximum : 750 W Standby : 40 W |
| Argon quality | 99.999 %, Argon pressure > 4 Mpa |
| Argon consumption | 4L / min during spark mode |
| Working temperature | 10 °C - 35 °C (Temperature ≥ 5 °C） |
| Working humidity | 20 % - 85 % |
| Dimension | 860 x 680 x 438 mm |
| Weight | 100 kg |
Features
CCD-based, spark discharge OES
Direct reading system
Digital light for ultra-high resolution
High-stability output rate of plasma
The analytical base is Fe base
Customizable bases are Fe, Cu, Al, Ni, Co, Mg, Ti, Zn, Pb, Sn, Ag, Mn, Cr, etc.
Flexible sample clamp design and on-site analysis of samples
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
