Introduction
Optical Emission Spectrometer features a wavelength range of 139-800 nm enabling measurement in deep UV range. With an optical focal length of 402 mm, it provides precise spectral dispersion. This Spectrometer can detect Fe, Al, Cu, Zn metal matrix enhancing analytical accuracy in metal composition analysis. A short detection time of 15-40 seconds enables high throughput and increases productivity. Optical Emission Spectrometer is used in metal manufacturing plants to rapidly analyse and verify the elemental composition of materials.
Applications
Optical Emission Spectrometer is used for qualitative and quantitative elemental analysis of metal and alloys in Metal Industry, Quality Control and Manufacturing.
Specifications
| Wavelength range | 139-800 nm, wavelength range measurable C, S, P, N |
| Detectable Matrix | Fe, Al, Cu, Zn matrix detection |
| Optical Structure | Type P-Longrange round full spectrum vacuum/non-vacuum optical system |
| Prober | 7-16 Block CCD, containing a measurement deep ultraviolet CCD |
| Gigantism Focal Length | HORIBA Jobin Y Concave Holographic Grating (2400 g/mm) |
| Optical Focal Length | 402 mm |
| Source Type | New adjustable digital light source, high energy pre-ignition technology (HEPS) |
| Discharge Frequency | 100-1000 Hz |
| Discharge Current | Max 100A |
| Ignition Voltage | 1-15 KV |
| Standby Average Power | 80 VA |
| Stimulate Maximum Power | 1000 VA |
| Working Power Supply | AC (220±20) V, (50±1) Hz, protective earthed single-phase power supply |
| Time of Detection | 15-40 s (depending on sample type) |
| Working Temperature | (10-30) °C |
| Humidity | (20-50) % |
| Vacuum Range of Light Room | 1-15 Pa |
| Argon Gas Purity | 99.999% |
| Argon Inlet Pressure | 0.2 MPa |
| Argon Gas Flow | Standby flow rate 0.1 L/min, excitation flow rate 6 L/min |
| Net Weight | 70 kg |
| Dimensions (L × W × H) | 870 × 550 × 420 mm |
Features
Full-spectrum analysis
Direct-reading spectrometer
Paschen-Runge optics
Precision excitation system
Optical thermostatic control
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
