Introduction
Methane Detector measures methane from 0 to 10,000 ppm and automatically adjusts to LEL and % VOL based on the detected concentration. It includes a powerful sampling pump for fast analysis, with a response time of ≤ 30 seconds. detector features a flexible probe for detecting methane leaks in underground locations. It is equipped with an LCD screen that rotates 180° and provides an adjustable backlight for improved visibility.
Applications
Methane Detector is used for quick and accurate detection of methane in industrial safety, environmental monitoring, and underground leak assessment.
Specifications
| Gas Detected | CH4 |
| Detection Principle | Semiconductor/IR |
| Measuring Range | 0 to 10000 ppm 0 to 100% LEL 0 to 100% VOL |
| Resolution | 1 ppm 1% LEL 0.01% VOL |
| Response Time | ≤ 30 seconds |
| Precision | ≤ ± 1 to 5 % F.S except for special gases |
| Working Temperature Range | - 20℃ to 50℃ |
| Humidity | 10 to 90 % RH (no condensation） |
| Working Pressure | 86 to 106 Kpa |
| Automatically Test and Calibrate After Power-On | Including reset, maximum value (MAX), minimum value (MIN), STEL, TWA value |
| Unit | PPM, mg/m3, %LEL, %VOL |
| Display | LCD (160 × 96) ,180° rotate |
| Data Record | 100,000 readings |
| Alarm | 95dB at 30cm buzzer alarm, flashing red LED alarm, and vibration alarm |
| Explosion-Proof | IECEx: Ex ia IIC T4 Ga ATEX : II 1G Ex ia IIC T4 Ga |
| Certification (EU Regulations) | 2004/34/UE (ATEX） |
| Protection Grade | IP67 |
| Working Hours | More than 15 hours in continuous pumping mode |
| Charger | Travel charger with DC interface, charging time ≥ 4 hours |
| Battery | 3.7V rechargeable lithium battery, |
| Battery Capacity | 2200mA |
| Dimensions (L × W × H) | 157 × 84.5 × 59.5 mm |
| Weight | 365g |
Features
Flexible probe for underground leaks
Low power consumption
Large lithium polymer battery
Datalogger with USB download
Durable IP67 polycarbonate case
Automatic voltage and pump failure alarms
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
