Introduction
A high speed centrifuge is a laboratory instrument that spins samples at high rotational speeds, typically from 10,000 to 30,000 revolutions per minute or higher, to separate components of a mixture by density using centrifugal force, and it is used in biology, biochemistry, and molecular biology for applications that require rapid and efficient separation. In operation, samples are placed in tubes that are loaded into a rotor, and the rotor is accelerated to the set speed; the centrifugal force, many thousands of times the force of gravity, causes denser particles, such as cells, organelles, and precipitated proteins, to sediment to the bottom of the tube, while lighter components remain in the supernatant, and the separated fractions can be collected for further analysis, with the separation efficiency depending on the speed, the rotor type, and the sample properties. High speed centrifuges are equipped with refrigeration systems in many models to keep the samples at a controlled low temperature during spinning, since the rotor friction can heat the samples, and they accept various rotor types, including fixed-angle and swinging-bucket rotors, and various tube sizes and capacities. They are used for cell harvesting, for separating cellular organelles, for protein precipitation and purification, for isolating nucleic acids, for concentrating samples, for removing particulates, and for many other preparative applications, in research, clinical, pharmaceutical, and biotechnology laboratories. Features include high maximum speed, temperature control, safety interlocks, and programmable runs. With their high separation power, high speed centrifuges are essential instruments in biological and biochemical laboratories.
High Speed Centrifuge LHS-T2022
High Speed Centrifuge features a maximum speed of 20000 rpm with an accuracy of ± 10 rpm. Its chamber is made of 304-stainless steel and coated with Teflon for corrosion resistance and ...
High Speed Centrifuge LHS-T2021
High Speed Centrifuge features a maximum speed of 18000 rpm with an accuracy of ± 10 rpm. It features an intelligent programs and stores up to 1,000 run histories. Its safety is enhance...
High Speed Centrifuge LHS-T2020
High Speed Centrifuge ‑C20 offers a maximum speed of up to 16500 rpm. It can accommodate up to 6 × 100 mL tubes and supports a variety of tube sizes for flexible sample processing. The...
High Speed Centrifuge LHS-T2012
High Speed Centrifuge features speed range of 500 to 15,000 rpm, ensuring precise results even for demanding samples. Its versatile rotor capacity accommodates 0.2 ml to 5 ml tubes, maki...
High Speed Centrifuge LHS-T2011
High Speed Centrifuge offers a variable speed range of 500 to 15,000 rpm, enabling precise control for diverse laboratory applications. The innovative three-air-flue ventilation system m...
High Speed Centrifuge LHS-T2010
High Speed Centrifuge operates at a high-speed range of 500 to 15,000 rpm for efficient sample separation. It includes adjustable timer settings from 1 second to 99 minutes for versatile...
High Speed Centrifuge LHS-T2010
High Speed Centrifuge features a 4×250ml capacity and operates at a speed of 20000 rpm. It is controlled by a microcomputer and powered by an AC frequency conversion brushless motor, en...
High Speed Centrifuge LHS-T2020
High Speed Centrifuge accommodates up to 4 × 800 ml capacity, making it suitable for both small and large-volume samples. With a maximum speed of 21,000 rpm, it ensures rapid processing...
High Speed Centrifuge LHS-T2010
High Speed Centrifuge is safe and reliable microprocessor controlled instrument having 21,000 rpm speed. It is well equipped with digital display, auto-electric locking system and brushl...
High Speed Centrifuge LHS-T2016
High Speed Centrifuge reaches a maximum speed of 20000 rpm for rapid separation. It features large touch panel allowing parameters to be revised during operation without shutdown. It fea...
High Speed Centrifuge LHS-T2027
High Speed Centrifuge features a maximum speed of 18500 rpm with a maximum of 23990 ×g. It has infrared heating uniformity, ensuring even temperature during heating processes. The centr...
High Speed Centrifuge LHS-T2040
High Speed Centrifuge achieves a maximum speed of 15,000 rpm with an accuracy of ± 20 rpm. It features a clear centrifugation in molecular biology and clinical laboratories. It utilizes...
High Speed Centrifuge LHS-T2030
High Speed Centrifuge achieves a maximum speed of 18500 rpm with an accuracy of ± 10 rpm. It features an and fixed angle rotors, accommodating a wide range of sample types. Its various ...
High Speed Centrifuge LHS-T2013
High Speed Centrifuge has a maximum speed of 20000 rpm and a maximum capacity of 4×250 ml for high-volume sample processing. It features a full steel inner cavity protective cover for e...
High Speed Centrifuge LHS-T2012
High Speed Centrifuge comes with a maximum speed of 18000 rpm and a capacity of up to 4 × 100 ml for efficiently separating large sample volumes. It features microcomputer control for p...
High Speed Centrifuge LHS-T2011
High Speed Centrifuge has a maximum speed of 16500 rpm and a capacity of up to 6 × 50 ml for efficient separation. It features a large for clear and easy monitoring of operational param...
High Speed Centrifuge LHS-T2015
High Speed Centrifuge reaches a maximum speed of 16500 rpm for rapid separation. It delivers a maximum of 21615×g, ideal for high-force sedimentation procedures. It supports a 12×5 ml ...
High Speed Centrifuge LHS-T2014
High Speed Centrifuge has a maximum speed of 21000 rpm and a maximum capacity of 4×750 ml for high-capacity sample processing. It features a brushless motor with fast speed and stable o...
High Speed Centrifuge LHS-T2022
High Speed Centrifuge comes with an adjustable speed range of 0 to 16,500 rpm for efficient sample processing. It provides an range from 0 to 19,480 xg, ensuring powerful separation. Wit...
High Speed Centrifuge LHS-T2026
High Speed Centrifuge is capable of reaching very high speeds up to 18500 . It is integrated with a refrigeration system that maintains the temperature of samples between -20℃ to 40℃. ...
High Speed Centrifuge LHS-T2025
High Speed Centrifuge features a maximum speed of 16000 rpm with a maximum of 27170 × g. It can effortlessly switch between low-speed and high-speed spinning modes, accommodating both s...
High Speed Centrifuge LHS-T2024
High Speed Centrifuge comes with 16000 rpm maximum speed, and 17940 g . display indicates speed, time, in operation. Rotor is connected to spindle by specialized taper sleeve. Made up of...
High Speed Centrifuge LHS-T2023
High Speed Centrifuge is a benchtop model which can accommodate both low speed and high speed rotors. Comes with display for speed and time. Brushless DC motor makes the unit maintenance...
High Speed Centrifuge LHS-T2021
High Speed Centrifuge is a microprocessor controlled table top type centrifuge having 16000 rpm speed. It is safe, reliable and user friendly instrument equipped with digital display, au...
High Speed Centrifuge LHS-T2020
High Speed Centrifuge offers a maximum speed of 16,000 rpm and a maximum relative centrifugal force () of 20,600 × g. With a capacity of 6 × 100 mL, it accommodates various sample volu...
High Speed Centrifuge LHS-T2010
High Speed Centrifuge is a microprocessor controlled light weight table top type system with an advanced design that enables easy operation. It is well equipped with digital display, aut...
Standards
IEC 61010-2-020:2016-Particular requirements for laboratory centrifuges
Complies with the above standards, but is not limited to them.
Features
1. High-speed centrifuge for rapid separation of samples at high rotational speeds.
2. High RCF capability for efficient separation of biological and chemical samples.
3. Suitable for molecular biology, clinical, pharmaceutical, chemical and research laboratories.
4. Multiple rotor options for various tube sizes and sample volumes.
5. Includes centrifuge, rotor, control panel, safety lid and operation manual.
FAQ
Q1: What testing scenarios is this centrifuge mainly applied to?
A: The high-speed centrifuge is used in molecular biology, clinical diagnostics, pharmaceutical research, chemical analysis, biotechnology and research laboratories to perform rapid separation of biological and chemical samples at high rotational speeds and relative centrifugal force. It supports cell and tissue homogenate separation, nucleic acid and protein precipitation, blood component separation, chemical precipitation and phase separation, subcellular organelle isolation, sample concentration, and general laboratory high-speed separation. The high RCF enables faster, more efficient separation of fine particles and precipitates that require higher centrifugal force than general-purpose centrifuges can provide. It is essential for molecular biology, clinical, pharmaceutical, chemical and research laboratories requiring high-speed separation for nucleic acid preparation, protein work, cell fractionation, sample processing, chemical analysis and research, where high centrifugal force enables efficient separation of small particles, precipitates and biological components that cannot be effectively separated at lower speeds, supporting molecular biology, clinical diagnostics, drug development and chemical research applications.
Q2: What standards does the centrifuge comply with?
A: The high-speed centrifuge complies with IEC 61010 laboratory electrical safety standards, IEC 61010-2-020 for centrifuges, and applicable GB/T standards. Clinical applications follow relevant medical device and laboratory standards. Rotors are rated for maximum speed and load. Calibration of speed, time and temperature (if refrigerated) should be performed periodically.
Q3: What is the warranty period for the whole machine and key components?
A: The whole centrifuge is covered by a 12-month warranty. The motor, controller, chamber and safety systems are covered, while rotors, tubes, adapters and fuses are consumables or accessories. Damage from improper use, rotor overload, exceeding speed rating or unauthorized repair is excluded. Extended service contracts are available.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires trained laboratory personnel familiar with centrifugation safety, rotor selection and sample handling. We provide an operation manual and remote guidance. Proper rotor selection, sample balancing, speed and time setting, and safety procedures are important for effective separation and safe operation.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Speed and time calibration recommended every 6-12 months. Rotor inspection for wear, corrosion and damage periodically, with replacement per manufacturer schedule. Safety lid interlock and imbalance detection tested regularly. Temperature calibration (if refrigerated) per schedule. Routine cleaning and decontamination recommended.
Q7: Are supporting consumables universal?
A: Centrifuge tubes, adapters and rotors are available from multiple suppliers, though rotor compatibility should be verified. Long-term consumable cost is moderate depending on sample volume and rotor usage.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes maximum speed, rotor types, tube capacity, refrigeration, control features and safety options. Additional rotors, adapters and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: Standard delivery includes the centrifuge, rotor and accessories with an operation manual. On-site installation and training are not included for standard orders but can be arranged for laboratory setup. Remote guidance is provided.
Q10: What types of samples are compatible with this equipment?
A: The high-speed centrifuge separates liquid samples in compatible tubes within the rotor capacity, speed rating and temperature specification. Samples should be properly balanced across the rotor. Highly volatile or hazardous samples require appropriate tube sealing and containment. Users should select the appropriate rotor and tube for the sample volume and required RCF, always balance the rotor symmetrically, never exceed the rotor or tube speed rating, use proper tube sealing for hazardous or volatile samples, follow decontamination procedures for biological samples, inspect rotors regularly for wear or corrosion, and never operate with a damaged rotor or unbalanced load. The centrifuge should be placed on a stable, level surface and the safety lid must always be used during operation.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.