High Speed Centrifuge LHS-T2020

Introduction

High Speed Centrifuge ‑C20 offers a maximum speed of up to 16500 rpm. It can accommodate up to 6 × 100 mL tubes and supports a variety of tube sizes for flexible sample processing. The centrifuge has advanced acceleration and deceleration profiles, which enable smooth, controlled run dynamics. Its safety features include imbalance detection, a motorized electronic door lock, and an emergency lid release. Our centrifuge is ideal for routine use in clinical, research, and industrial laboratories.

It utilizes high-speed rotation to separate components of different densities, widely used in biological, medical, and chemical laboratories. The unit is equipped with safety protection systems to ensure operator safety during high-speed operation.

Applications

Our High Speed Centrifuge is ideal for rapid separation in molecular biology, diagnostics, and pharmaceuticals, including nucleic acid extraction, cell fractionation, and protein isolation.

Specifications

Max Speed	16500 rpm
Speed Accuracy	± 10 rpm
Max	24814 × g
Capacity	6 × 100 mL
Timing Range	1 sec to 99 h 59 min 59 sec
Display
Noise	Up to 60 dB (A)
/ Rates	40 rates
Programs	Up to 1000
Power Consumption	500 W
Dimension	440 × 360 × 315 mm
Net Weight	29 kg

Features

Automatic rotor recognition

Touchscreen operation

Password protection

and automatic conversion

Anti‑corrosion stainless steel chamber

FAQs

1. What is the maximum sample volume that can be processed in the centrifuge?

The maximum sample volume depends on the type of rotor used with the centrifuge. Typical rotors can accommodate sample volumes ranging from 0.2 mL (microcentrifuge tubes) to 50 mL (conical tubes) or larger for specialized rotors. It is important to check the centrifuge's specifications and rotor compatibility to ensure that the sample volume does not exceed the recommended limits, which could affect centrifugation efficiency and safety.

2. How to balance the centrifuge before operation?

Proper balancing is critical for safe and effective centrifuge operation: 1) Ensure that all sample tubes have the same volume and weight; 2) Place the tubes symmetrically in the rotor, opposite each other; 3) For odd numbers of samples, use a balance tube filled with the same volume of appropriate solution; 4) Check that the rotor is properly seated and secured in the centrifuge; 5) Avoid overloading the rotor beyond its maximum capacity.

3. What is the difference between relative centrifugal force (RCF) and revolutions per minute (RPM)?

RCF is a measure of the centrifugal force applied to the sample, expressed in multiples of gravity (x g), and depends on both the RPM and the radius of the rotor. RPM is a measure of the rotor's rotation speed in revolutions per minute. The relationship between RCF and RPM is given by the formula: RCF = 1.118 × 10^-5 × r × RPM² (where r is the rotor radius in centimeters). For most applications, RCF is the preferred parameter as it directly relates to the separation efficiency, regardless of rotor size.

4. How to maintain the centrifuge to ensure long service life?

Regular maintenance includes: 1) Cleaning the rotor and chamber after each use to remove sample spills and debris; 2) Inspecting the rotor for cracks, corrosion, or wear before each use; 3) Lubricating moving parts according to the manufacturer's recommendations; 4) Calibrating the speed and temperature controls annually or after major service; 5) Ensuring proper ventilation around the centrifuge to prevent overheating; 6) Storing the centrifuge in a clean, dry environment when not in use.

5. What safety precautions should be taken when using the centrifuge?

Important safety precautions include: 1) Always balance the sample tubes properly before operation; 2) Ensure the rotor is correctly installed and secured; 3) Do not open the centrifuge lid while the rotor is still spinning; 4) Use appropriate personal protective equipment (gloves, goggles) when handling samples and cleaning the equipment; 5) Avoid overloading the centrifuge beyond its maximum capacity; 6) Regularly inspect the centrifuge for any signs of damage or malfunction and discontinue use if any issues are found.

1. How does the High Speed Centrifuge support flexible sample separation protocols?

High Speed Centrifuge offers a wide speed range up to 16500 rpm, along with time settings from 1 second to 99 hours, 59 minutes, and 59 seconds. This enables precise customization of centrifugation parameters for both quick micro-sample spins and long-duration protocols. Such flexibility ensures optimal performance across various sample types and laboratory workflows. It is ideal for research, clinical diagnostics, and routine lab operations.

2. What user interface features does the High Speed Centrifuge provide for efficient operation?

High Speed Centrifuge features a smart touchscreen that clearly displays run parameters, including automatic and values. The intuitive interface allows quick setting adjustments and smooth navigation, reducing training time and minimizing errors. It supports reliable, efficient operation even in high-pressure environments. The interface is glove-friendly and designed for continuous laboratory use.

3. Are the rotors compatible with the High Speed Centrifuge autoclavable?

The High Speed Centrifuge centrifuge supports a range of fully autoclavable rotors, including fixed-angle aluminum and swing-out steel types. These rotors can withstand repeated sterilization cycles without compromising structural integrity or performance. This makes the system highly suitable for aseptic processes and biosafety-compliant workflows. It ensures both user safety and sample protection.

4. What safety features are included in the High Speed Centrifuge centrifuge?

High Speed Centrifuge integrates advanced safety features such as automatic overspeed protection, imbalance detection using a three-axis gyroscope, motorized lid lock, and emergency door release. Additionally, gas hinge support ensures safe and controlled lid movement. These features collectively enhance user safety and equipment durability during routine and intensive operations.