Introduction
A drop tester is an instrument used to test the impact resistance of the packages and the products by the dropping them from a specified height, and it is used in the packaging, the electronics, the automotive, and the many other industries for the testing of the drop resistance and the protection of the products. The drop tester consists of a test stand or a frame, a lifting and a release mechanism, which raises the test article to the specified height and releases it, a drop surface, and a control, and it drops the test article in a controlled manner, from the specified heights and in the specified orientations, and the damage and the performance of the test article are observed, following the standard test methods, such as the ASTM and the ISO standards; the drop tester is used for the testing of the drop resistance of the packages, for the testing of the protection of the products in the transport, for the testing of the electronic devices and the components, for the testing of the packaging materials, for the quality control, for the product development, and for many other applications, and it is available in various configurations, from the manual models to the automatic models, with the different drop heights and the capacities; the drop tester is an essential equipment for the drop testing. Drop testers are used in the packaging industry, in the electronics industry, in the automotive industry, in the logistics, and for many other applications. With their drop testing, drop testers are essential for the product protection testing.
Drop Impact Tester LIDT-T2010
Drop Impact Tester designed within a temperature range of 10℃ to 40℃. It features a drop height range of 400 to 1500 mm allowing flexibility for various testing needs. Equipped with a ...
Micro Drop Tester LMDP-T2010
Micro Drop Tester features a test speed range of 10 to 30 drops per minute. Its manual pre-adjustment function allows easy setup of action components for accurate positioning. The acryli...
Single Wing Drop Tester LSWDT-T2011
Single Wing Drop Tester offers a drop height range of 300 to 2000 mm for optimal performance. It features a single-arm double-column structure for stable lifting without lateral shaking....
Single Wing Drop Tester LSWDT-T2010
Single Wing Drop Tester features a drop height range of 300 to 1500 mm for reliable performance. It includes a hydraulic buffer to absorb impact and protect the table from damage. The te...
Precision Drop Tester LPDT-T2012
Precision Drop Tester adjustable drop height up to 1400 mm, with a precise digital display for accurate testing. It supports automated drop testing to ensure consistency and repeatabilit...
Precision Drop Tester LPDT-T2011
Precision Drop Tester adjustable drop height up to 1200 mm, with a precise digital display for accurate testing. It is designed to evaluate packaging durability by simulating impact forc...
Precision Drop Tester LPDT-T2010
Precision Drop Tester 0.1 mm display accuracy for reliable performance. It is designed to evaluate the drop resistance of packaging during transportation and handling. Its advanced micro...
Standards
ISO 2248:1972-Packaging-Complete, filled transport packages-Vertical impact test by dropping
ISO 12048:1994-Packaging-Complete, filled transport packages-Compression and stacking tests using a compression tester
Complies with the above standards, but is not limited to them.
Features
1. Drop tester for evaluating package and product resistance to free-fall drops.
2. Controlled drop from adjustable height with various orientations for packaging and product impact testing.
3. Suitable for packaging testing, transportation simulation, quality control, research and industrial labs.
4. Includes drop frame, release mechanism, drop height adjustment, impact surface, controller and manual.
5. Supports free-fall drop testing for packaging integrity, product durability and transportation hazard simulation.
FAQ
Q1: What testing scenarios is this tester mainly applied to?
A: The drop tester is used in packaging laboratories, transportation simulation, quality control, manufacturing, research and industrial testing to evaluate the resistance of packaged products and goods to free-fall drops from controlled heights and orientations, simulating handling and transportation hazards such as accidental drops, falls from conveyors, and rough handling. It supports packaging integrity testing (corrugated boxes, crates, pallets), product durability testing (electronics, appliances, glassware, industrial goods), transportation hazard simulation (ISTA, ASTM test procedures), and package design validation.
Q2: What standards does the tester comply with?
A: The drop tester follows relevant ISO, ASTM, ISTA and GB/T standards including ISO 2248 (packaging - complete, filled transport packages - vertical impact test by dropping), ASTM D5276 (standard test method for drop test of loaded containers), ASTM D5487 (standard test method for simulated drop of loaded containers by shock machine), ISTA test procedures (1A, 1B, 2A, 3A - include drop tests), and GB/T 4857.5 (packaging - drop test). The hardware complies with IEC 61010 safety standards and machinery safety standards. Calibration should use certified measuring instruments (height gauge, angle finder) traceable to national standards.
Q3: What is the warranty period for the whole tester and key components?
A: The whole drop tester is covered by a 12-month warranty. The drop frame, release mechanism, height adjustment, impact surface, guide rails, controller and housing are covered, while release cables, bearings, paint/finish and fuses are consumables or accessories. Damage from improper use, overloading, impact damage or unauthorized repair is excluded. Extended warranty may be available.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires trained technicians familiar with packaging test methods and safety procedures. We provide operation manuals and training. Proper sample preparation (mark package for orientation, secure loose items), test setup (drop height per standard, package orientation - face, edge, corner), release mechanism operation (ensure clean release, no rotation imparted), impact observation (high-speed camera optional), post-test inspection (package damage, product damage, cushioning performance), and safety procedures (stand clear, no personnel in impact zone, PPE) are important for safe, repeatable testing.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Drop height calibration recommended every 6-12 months using certified height gauge. Release mechanism function check per schedule. Impact surface flatness/level check annually. Full tester performance verification annually. For accredited laboratories, follow ISO/IEC 17025 calibration requirements.
Q7: Are supporting consumables universal?
A: Release cables, bearings, lubricants, paint/finish, safety labels and fuses are available from industrial suppliers. Long-term consumable cost is low. Test samples (packaging) are consumed during testing.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes drop height range (typically 0-200 cm, up to 300 cm for heavy packages), maximum package weight and size, impact surface material (steel, concrete, wood), release mechanism (manual, pneumatic, electric), package orientation fixture (for precise edge/corner drops), data acquisition (impact accelerometer, high-speed camera integration), safety guarding, language and accessories. Additional fixtures can be ordered separately.
Q9: Does the purchase include on-site installation and commissioning service?
A: Standard delivery includes the drop tester and instruction manual. On-site installation and training are not included for standard orders but can be arranged at additional cost. Remote guidance is provided.
Q10: What types of packages are compatible with this equipment?
A: The drop tester tests various packaged products including corrugated fiberboard boxes (single, double, triple wall), wooden crates and cases, plastic containers, drums, buckets, bags, small pallets and unit loads, cushioning materials, and packaged consumer goods (electronics, appliances, furniture, glassware, lighting, industrial equipment) within the weight, size, and drop height specification. Different package types require specific test setups per applicable standard (ISTA, ASTM, ISO, GB/T), including drop sequence (order of face, edge, corner drops per standard), drop height (based on package weight and distribution environment - typically 30-120 cm for parcels, lower for heavy items), and post-test evaluation criteria (package integrity, product damage, cushioning performance, seal integrity).
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.