Introduction
A low speed centrifuge is a laboratory centrifuge that operates at relatively low rotational speeds, typically up to about 4,000 to 6,000 revolutions per minute, and it is used for gentle separation of mixtures, such as sedimentation of cells, precipitates, and particles from liquids, and for applications that do not require high centrifugal force. In operation, samples in tubes are loaded into a rotor, and the rotor is spun at a controlled low speed, generating a moderate centrifugal force that causes particles denser than the liquid, such as blood cells, yeast cells, and precipitates, to sediment to the bottom of the tube, while the supernatant remains above; low speed centrifugation is gentle and is used for applications where high speed could damage the sample, such as the separation of whole cells and blood components, and the separated fractions can be collected and used for further analysis. Low speed centrifuges are typically equipped with swinging-bucket or fixed-angle rotors, with capacities for tubes, conical tubes, and microplates, and they may include features such as timers, speed control, and refrigeration in some models. They are used in clinical laboratories for separating blood components, for routine sample preparation, for urine analysis, and for plasma and serum separation; in biology laboratories for cell harvesting and washing; in biochemistry for precipitation and phase separation; and in many other laboratory applications. With their gentle operation and versatility, low speed centrifuges are essential basic instruments in laboratories.
Low Speed Centrifuge LLS-T311
Low Speed Centrifuge capacity of 8 × 15 ml for efficient sample separation. Its visual feedback. The universal rotor compatibility enhances versatility. Its time-control functionality e...
Low Speed Centrifuge LLS-T310
Low Speed Centrifuge capacity 6 × 15 ml for small-scale laboratory. It offers enhanced sample safety to prevent contamination. The intelligent control system ensures accurate speed. Its...
Low Speed Centrifuge LLS-T2033
Low Speed Centrifuge features a 12-card capacity suitable for routine diagnostic applications. It operates at 4000 rpm with a high of 1480×g for fast and efficient separation. The intui...
Low Speed Centrifuge LLS-T2018
Low Speed Centrifuge offers at a speed range of 500 to 4000 rpm and features a rotor capacity of 24 blood tubes. It is equipped with advanced lid opening protection, which prevents accid...
Low Speed Centrifuge LLS-T2017
Low Speed Centrifuge is designed with a speed range of 500 to 4000 rpm, achieving a maximum of 2182 × g. The centrifuge is equipped with advanced an monitoring, and a program memory fun...
Low Speed Centrifuge LLS-T2016
Low Speed Centrifuge is a high-performance centrifuge offering a speed range of 500 to 4000 rpm with precise 100 rpm increments. It features a programmable timer ranging from 30 seconds ...
Low Speed Centrifuge LLS-T2015
Low Speed Centrifuge operates between an impressive speed range 500 to 4000 rpm. It features an external circulation heat emission hole for optimal heat dissipation. The centrifuge has a...
Low Speed Centrifuge LLS-T2014
Low Speed Centrifuge has an adjustable speed range of 500 to 4000 rpm with a maximum of 1967 × g. It features over temperature, vibration and lid opening protection functions. The centr...
Low Speed Centrifuge LLS-T2026
Low Speed Centrifuge has a maximum speed of 5000 rpm and a maximum of 3013×g for efficient sample processing. It features a microcomputer control system with an HD variable frequency mo...
Low Speed Centrifuge LLS-T2025
Low Speed Centrifuge has a maximum speed of 6000 rpm and a maximum of 4338×g for efficient sample processing. It comes with a tool rack for securely storing accompanying tools. The cham...
Low Speed Centrifuge LLS-T2024
Low Speed Centrifuge has a maximum speed of 6500 rpm and a maximum of 5952×g for efficient sample separation. It features overspeed, overheat, and unbalanced protections for enhanced sa...
Low Speed Centrifuge LLS-T2023
Low Speed Centrifuge a maximum speed of 5500 rpm and a maximum of 5952×g for efficient sample separation. It comes with an operation guide map, making it easier and more standardized fo...
Low Speed Centrifuge LLS-T2022
Low Speed Centrifuge has a maximum speed of 6500 rpm and a maximum of 5091×g for efficient separation. It comes with a centrifuge chamber made of stainless steel for enhanced durability...
Low Speed Centrifuge LLS-T2021
Low Speed Centrifuge has a maximum speed of 5500 rpm and a maximum relative centrifugal force () of 4919×g for efficient separation. It features a program group shortcut key and large s...
Low Speed Centrifuge LLS-T2058
Low Speed Centrifuge reaches a maximum speed of 5000 rpm with ±10 rpm speed accuracy. It provides a maximum of 3186×g and supports up to 12×15 mL sample tubes. Equipped with an invert...
Low Speed Centrifuge LLS-T2010
Low Speed Centrifuge is a portable and compact unit offering a maximum speed of 5000 rpm. It holds up to 4 × 50ml of capacity and works at ambient temperature. It includes an to Convert...
Low Speed Centrifuge LLS-T2044
Low speed centrifuge operates at maximum speed of 5000rpm with an accuracy of ± 20r/mi. Equipped with a brushless frequency motor, it offers high torque and rapid acceleration/decelerat...
Low-speed Centrifuge LLS-T2043
Low-speed centrifuge offers a maximum speed of 5000rpm for qualitative analysis of blood serum, plasma, and urea. Its brushless frequency motor ensures free maintenance, no powder pollut...
Cyto-Low Speed Centrifuge LLS-T2015
Cyto-Low Speed Centrifuge runs at a maximum speed of 4000 rpm and generates up to 2170 × g force, enabling fast separation of samples like blood cells and plasma. It holds 6 tubes of 9 ...
Cyto-Low Speed Centrifuge LLS-T2016
Cyto-Low Speed Centrifuge is a benchtop centrifuge equipped with advanced features for accurate and regulated centrifugation. Our centrifuge accommodates up to 6 tubes, each holding capa...
Cyto-Low Speed Centrifuge LLS-T2014
Cyto-Low Speed Centrifuge operates on a rotational speed of 3000 rpm allowing users to adjust the speed based on the sample type and desired cell concentration. Its single rotor can acco...
Low-Speed Centrifuge LLS-T2057
Low-Speed Centrifuge combines compact size with operational flexibility making it the perfect option for quickly and simply centrifuging samples in microplates and plates. Featuring maxi...
Low Speed Centrifuge LLS-T2055
Low speed Centrifuge is a compact and tabletop unit, offers maximum speed of 6000 rpm and 4730×g of maximum with 4×800 ml of capacity. Features microprocessor control and 10 kinds of a...
Low Speed Centrifuge LLS-T2056
Low Speed Centrifuge is a microcomputer-controlled unit with 8×20 ml of capacity, features 4000 rpm speed range with1880×g of at normal temperature. Compact design with digital display...
Low Speed Centrifuge LLS-T2054
Low Speed Centrifuge is a microprocessor-controlled table-top unit, offers 4×300 ml of capacity with 6000 rpm of maximum speed and 4730×g of maximum . Compact design with digital displ...
Low Speed Centrifuge LLS-T2013
Low Speed Centrifuge is a compact, tabletop centrifuge, with temperature range of 10 to 80°C and constant temperature control function. Incorporated programmable microprocessor control ...
Low Speed Centrifuge LLS-T2053
Low Speed Centrifuge is a microprocessor controlled, compact design centrifuge with 5500 rpm maximum speed. Electric lid lock door provides protection against imbalance, and high speed. ...
Low Speed Centrifuge LLS-T2051
This table-top low speed centrifuge is equipped with advanced low noise flexible axle driven rotor system which ensure smooth functioning. It has electric lid lock system, which provides...
Low Speed Centrifuge LLS-T2050
This low speed, large capacity centrifuges with advanced design can run large capacity samples at controlled temperature. This centrifuge has variety of rotors for easy and safe loading ...
Low Speed Centrifuge LLS-T2042
Low speed centrifuge comes with compact design, self-locking system which provides protection against over speed, over temperature and imbalance. Equipped with low noise flexible axle dr...
Low Speed Centrifuge LLS-T2041
Low-Speed Centrifuge offers a maximum speed of 5000 rpm. It features a digital display showing speed, time, and temperature. It offers 10 programs and 10 acceleration/deceleration option...
Low Speed Centrifuge LLS-T2040
Low Speed Centrifuge comes with large capacity for bulky samples. It runs on low noise, brushless DC motor, consisting of automatic rotor identification and is a must-have in the biologi...
Low Speed Centrifuge LLS-T2032
Low Speed Centrifuge supports 24 reagent cards, designed for high-throughput serological testing. It operates at a maximum speed of 4000 rpm with ±20 rpm accuracy, ensuring consistent r...
Low Speed Centrifuge LLS-T2031
Low speed centrifuge is used for separation of impurities from a variety of samples. It features auto power cut for safe operations and brushless DC motor for silent running. Low speed c...
Low Speed Centrifuge LLS-T2030
Low speed centrifuge is a robust table top centrifuge configured with superior temperature control for low temperature demanding samples and advance control system for sup operation and ...
Crude Oil Test Low Speed Centrifuge LLS-T2020
Crude Oil Test Low Speed Centrifuge offers a maximum speed of 4000rpm ensuring efficient separation of impurities from crude oil samples. Its microcomputer control system allows users t...
Low Speed Centrifuge LLS-T2012
Low Speed Centrifuge runs at up to 6500 rpm with a maximum force of 5091 ×g. It features microcomputer control and a brushless motor for fast, stable performance. The 10-step accelerati...
Low Speed Centrifuge LLS-T2011
Low Speed Centrifuge is a benchtop Gerber centrifuge with 15 Gerber tubes maximum capacity and 1500 rpm maximum speed. The microprocessor controlled system and brushless frequency motor ...
Cyto-Low Speed Centrifuge LLS-T2010
Cyto-Low Speed Centrifuge offers a maximum speed of 4000 rpm with a capacity of 6 tubes. With an of 2500 ×g, it works on a timer range of 0 to 99 min. This system is efficiently control...
Standards
IEC 61010-2-020:2016-Particular requirements for laboratory centrifuges
Complies with the above standards, but is not limited to them.
Features
1. Low-speed centrifuge for routine separation of biological and chemical samples.
2. Moderate speed and RCF for general laboratory separation applications.
3. Suitable for clinical, biological, chemical, educational and research laboratories.
4. Multiple rotor options for various tube sizes and sample volumes.
5. Includes centrifuge, rotor, control panel, safety lid and operation manual.
FAQ
Q1: What testing scenarios is this centrifuge mainly applied to?
A: The low-speed centrifuge is used in clinical laboratories, biological research, chemical analysis, educational institutions, hospitals and research facilities to perform routine separation of biological and chemical samples at moderate rotational speeds. It supports blood serum and plasma separation, urine sediment preparation, general biological sample separation, chemical precipitation separation, cell washing, sample clarification, and educational laboratory demonstrations. The low-speed design provides sufficient centrifugal force for routine separations while being gentle on samples and easy to operate, making it ideal for clinical and educational environments. It is essential for clinical, biological, chemical and educational laboratories requiring routine sample separation for blood processing, clinical testing, biological sample preparation, chemical analysis, cell work and educational demonstrations, where moderate centrifugal force is sufficient for common separations and where ease of use, safety and reliability are important for daily laboratory operations in clinical, research and educational settings.
Q2: What standards does the centrifuge comply with?
A: The low-speed centrifuge complies with IEC 61010 laboratory electrical safety standards, IEC 61010-2-020 for centrifuges, and applicable GB/T standards. Clinical applications follow relevant medical device and laboratory standards. Rotors are rated for maximum speed and load. Calibration of speed and time should be performed periodically.
Q3: What is the warranty period for the whole machine and key components?
A: The whole centrifuge is covered by a 12-month warranty. The motor, controller, chamber and safety systems are covered, while rotors, tubes, adapters and fuses are consumables or accessories. Damage from improper use, rotor overload or unauthorized repair is excluded. Extended service contracts are available.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires basic training in centrifugation safety, rotor selection and sample handling. We provide an operation manual and remote guidance. Proper rotor selection, sample balancing, speed and time setting, and safety procedures are important for effective separation and safe operation.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Speed and time calibration recommended every 6-12 months for clinical use. Rotor inspection for wear and damage periodically. Safety lid interlock tested regularly. Routine cleaning and decontamination recommended, particularly for biological samples.
Q7: Are supporting consumables universal?
A: Centrifuge tubes, adapters and rotors are available from multiple suppliers, though rotor compatibility should be verified. Long-term consumable cost is low to moderate depending on sample volume.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes maximum speed, rotor types, tube capacity, timer, control features and safety options. Additional rotors, adapters and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: Standard delivery includes the centrifuge, rotor and accessories with an operation manual. On-site installation and training are not included for standard orders but can be arranged for clinical laboratory setup. Remote guidance is provided.
Q10: What types of samples are compatible with this equipment?
A: The low-speed centrifuge separates liquid samples in compatible tubes within the rotor capacity and speed specification. Samples should be properly balanced across the rotor. Biological samples require appropriate containment and decontamination. Users should select the appropriate rotor and tube for the sample volume, always balance the rotor symmetrically, never exceed the rotor or tube speed rating, use proper tube sealing for biological or hazardous samples, follow decontamination procedures, inspect rotors regularly for wear or damage, and never operate with a damaged rotor or unbalanced load. The centrifuge should be placed on a stable, level surface and the safety lid must always be used during operation. For clinical use, proper biosafety procedures should be followed for blood and body fluid samples.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.