Introduction
Laboratory Spray Dryer is designed for rapid drying of liquids into fine powders. They are commonly used in research labs for processing various solutions and suspensions. These devices offer efficient small-scale production. Their Laboratory Spray Dryers help create powdered samples for analysis, testing, and further development. Our Laboratory Spray Dryer are ideal for small-scale production, research, and formulation of powdered samples and ideal for pharmaceuticals, food processing applications.
Lab Spray Dryer LLSD-T2012
Lab Spray Dryer offers a minimum sample volume of 20 to 30 ml, supporting ultra-low input testing for minimizing sample waste. The automatic de-blocking device prevents the nozzle from b...
Bench Top Spray Dryer LBSD-T2011
Bench Top Spray Dryer features a maximum sample feed of 500 mL/h. It has an integrated inert loop to provide closed loop circulation under inert conditions. This dryer features a 7-inch ...
Pilot Spray Dryer LPSD-T2011
Pilot Spray Dryer has a capacity of 10L/h and can process 200ml of samples to minimize sample wastage. It features an 8-inch frequency. It comes equipped with dual-fluid nozzles for prec...
Pilot Spray Dryer LPSD-T2010
Pilot Spray Dryer maximum sample feed capacity is 5000ml/hr. It requires a minimum sample amount of 100 ml to experiment. It accommodates a broad spectrum of particle sizes, making it su...
Lab Spray Dryer LLSD-T2011
Lab Spray Dryer offers a feedstock of 3000 ml/h and requires only 100 ml of sample supply. It comes equipped with dual-fluid nozzles for precise, fine sprays. By integrating an inert loo...
Lab Spray Dryer LLSD-T2010
Lab Spray Dryer is a high-performance machine for efficient powder drying applications. Capable of evaporating maximum of 2000ml/hr sample feed. The chamber is constructed from borosilic...
Bench Top Spray Dryer LBSD-T2010
Bench Top Spray Dryer accommodates a maximum processing capacity of 500 mL/h. Our dryer requires only 30ml of sample for the operation. It is a small size unit that offers convenient ope...
Lab Spray Dryer SD200
Lab Spray Dryer designed for converting liquid solutions into fine powders, suitable for heat-sensitive materials, with an inlet temperature control ranging from 30 to 300°C. It features...
Standards
QB/T 1164-2000-Pressure spray dryer for concentrated milk and other liquid materials (Chinese light-industry standard)
Complies with the above standards, but is not limited to them.
Features
1. Safety interlocks guard heaters and the chamber.
2. Bench and pilot models fit development and small production.
3. Nozzle options suit different feeds and particle sizes.
4. Clear display shows temperatures, feed and process values.
5. Cyclone and collection system recover the powder.
FAQ
What are the main applications of the Laboratory Spray Dryer?
The Laboratory Spray Dryer is used to turn liquid feed into dry powder by atomising it into hot air. It supports food, pharmaceutical, chemical and materials development, especially for heat-sensitive products.
Which standards and regulations apply to the Laboratory Spray Dryer?
The unit is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for spray-drying equipment, with processes following good practice. Compliance documentation can be provided on request.
How long is the warranty period?
The complete unit carries a 12-month warranty from delivery, covering the main body, core components and controller against manufacturing defects. Consumables and wearing parts such as filters, seals and probes are not covered. Damage from misuse, improper power or unauthorised repair is excluded, and extended warranty can be quoted.
Will staff need special training?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Laboratory Spray Dryer need calibration or verification?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are consumables and spare parts easy to obtain?
Filters, seals, probes and similar items are standard and can be supplied through our channel. Customers may also source equivalent items that meet the specification. Provide the model and serial number to confirm compatibility before ordering.
Can it be adapted to our requirements?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
How is the Laboratory Spray Dryer commissioned?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What should be avoided when using the Laboratory Spray Dryer?
Do not feed abrasive or incompatible liquids, block nozzles or ignore high-temperature safety. Control inlet and outlet temperatures. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.