Lab Spray Dryer LLSD-T2011

Introduction

Lab Spray Dryer offers a feedstock of 3000 ml/h and requires only 100 ml of sample supply. It comes equipped with dual-fluid nozzles for precise, fine sprays. By integrating an inert loop system, it can be converted into an organic solvent spray dryer. The dryer body is made from stainless steel for durability and hygiene in harsh environments. Our lab spray dryer is suitable for spray drying sugary materials and prevents wall sticking.

This laboratory spray dryer is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Lab Spray Dryers are used in various industries, including chemical, food, new energy, medicine, ceramics, and textile, which may require extremely consistent, fine particle size.

Specifications

Maximum Sample Feed	3000 ml/hr
Minimum Sample Volume	50 ml
Body Material	Stainless steel
Maximum Inlet Temperature	RT to 300°C
Compressed Air	108 L/min
Rated Airflow	100m³/h
Nozzle Type	Two fluid nozzles
Nozzle Jet	1.5mm standard/ (0.5/0.8/1.0/2.0mm available)
Possible Particle Size Range	1 to 80 µm
Mean Residence Time	1.0 to 1.5 sec
Heater Power	5000W
Power Consumption	5500W
Power Supply	220V; single-phase 50/60 Hz
Dimensions (L×W×H)	1050 × 1000 × 1770 mm
Packaging Dimension	1160 × 1120 × 2000mm
Net Weight	195kg
Gross Weight	291kg

Features

Equipped with a built-in air compressor

304 Stainless steel body

Automatic/manual operation mode

Optional Inert loop for organic solvents

7-Inch

Automatic Deblocking

FAQs

1. What are the key factors to consider when selecting this laboratory spray dryer for laboratory use?

When selecting this laboratory spray dryer, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this laboratory spray dryer be calibrated to ensure accurate results?

It is recommended to calibrate this laboratory spray dryer at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this laboratory spray dryer?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this laboratory spray dryer be used with different types of samples, and are there any compatibility considerations?

Yes, this laboratory spray dryer can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the laboratory spray dryer malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.