Introduction
Laboratory Shaker Incubator operates with in a range of 40 to 300 rpm for diverse lab applications. They Feature a slope design panel with a large LCD for controlling and monitoring critical parameters. Their password locking feature prevents unauthorised access. These incubators retain data settings even after a power outage for continuous operation. Our Laboratory Shaker Incubator with an alarm system for temperature deviation is a reliable choice for various labs.
Laboratory Shaker Incubator LSI2047
Laboratory Shaker Incubator precise temperature control from 4°C to 60°C with ±0.1°C accuracy for sensitive applications. It supports dual shaking modes, rotary and reciprocal operati...
Laboratory Shaker Incubator LS2045
Laboratory Shaker Incubator is a 582 L device, offering a temperature range of 4 to 60 °C adopting a strong and fast refrigeration system for instant cooling requirements and automatic d...
Laboratory Shaker Incubator LS2046
Laboratory Shaker Incubator double door incubator runs by large torque motor ensuring continuous work without maintenance and low noise. The slope design control panel and large LCD have ...
Laboratory Shaker Incubator LS2041
Laboratory Shaker Incubator is a high-performance device with a low maintenance/no maintenance torque motor included. A slope design control panel with an LCD display for controlling and ...
Laboratory Shaker Incubator LS2043
Laboratory Shaker Incubator is a uniquely designed 280 L double door shaking incubator that works by torque motor making the device low noise and no maintenance. Integrated with slope con...
Laboratory Shaker Incubator LS2044
Laboratory Shaker Incubator is an effective double door incubator offering a temperature range of RT+5 to 60 ℃ and a shaking speed of 4 to 300 rpm driven by a torque motor. Designed with...
Laboratory Shaker Incubator LS2042
Laboratory Shaker Incubator is a high-performance single-door incubator powered by the most advanced large torque motor, ensuring continuous operation with minimal maintenance and noise. ...
Standards
IEC 61010-2-010:2019-Particular requirements for laboratory equipment for the heating of materials
ISO 11133:2014-Microbiology of food, animal feed and water-Preparation, production, storage and performance testing of culture media
Complies with the above standards, but is not limited to them.
Features
1. Good insulation and door gasket reduce heat loss.
2. Over-temperature and sensor-fault alarms protect samples.
3. Adjustable, removable shelves accommodate varied loads.
4. Independent safety thermostat backs up the main controller.
5. Smooth stainless chamber with rounded corners is easy to clean.
FAQ
What is the Laboratory Shaker Incubator mainly used for?
The Laboratory Shaker Incubator is used to maintain samples at a stable, controlled temperature for incubation, culturing, warming and general biological work. It is widely used in microbiology, clinical, food, pharmaceutical and research laboratories.
Which standards and regulations apply to the Laboratory Shaker Incubator?
The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for laboratory incubators. Test and culture procedures should follow the applicable standard methods. Compliance documentation can be provided on request.
How long is the warranty period?
We provide a 12-month limited warranty on the instrument and its key working parts. Consumables, accessories and parts subject to normal wear are excluded, as is damage caused by incorrect operation or maintenance. An extended service plan is available on request.
Will staff need special training?
The controls are designed for regular laboratory use, so most users become confident after a brief introduction. The manual walks through each step, and common settings can be saved for repeat work. Online or on-site training is available if the site requires it.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Is calibration included?
Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.
Are the consumables universal or proprietary?
The instrument uses standard, widely available consumables rather than special locked items. Replacement parts, accessories and consumables can be ordered from us against the model number. We keep common service parts in stock for prompt supply.
Can the Laboratory Shaker Incubator be customised?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
How is the Laboratory Shaker Incubator commissioned?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What should be avoided when using the Laboratory Shaker Incubator?
Flammable, volatile or corrosive materials should not be placed in a standard incubator, and pathogenic agents require containment. Avoid overloading and clean spills promptly. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.