Bench Top Spray Dryer LBSD-T2010

Introduction

Bench Top Spray Dryer accommodates a maximum processing capacity of 500 mL/h. Our dryer requires only 30ml of sample for the operation. It is a small size unit that offers convenient operation with an inert loop system. Designed for both aqueous solutions and organic solvents. Equipped with a bag filter for tail gas dedusting. Its exhaust air management improves yield, especially for difficult-to-recycle materials.

This laboratory spray dryer is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Bench Top Spray Dryer is employed in various applications, including the processing of beverages, pharmaceuticals, plant extracts, and ceramics. It is also effective for handling heat-sensitive materials, polymers, detergents, and numerous other substances.

Specifications

Capacity	500ml/h
Minimum Sample Volume	30ml
Rated Airflow	1 m³/min
Display	7-Inch
Min. Outlet Temperature	80°C
Max. Inlet Temperature	200°C
Heater Power	1500W
Temperature Precision	±1°C
Nozzle Jet	1.0mm standard/ (0.5/0.8/1.5/2.0mm available)
Nozzle Type	Two fluid nozzle
Controls include	Inlet Temperature Gas Flow Volume Pump Speed De-blocker Frequency
Possible Particle Size Range	1-25μm
Mean Residence Time	1.0-1.5 sec
Operation Mode	Automatic/Manual
Max. Sample Feed	500ml/hr
Gas Type	Compressed air (for aqueous)
Body Material	SUS304 Stainless steel
Material Feeding Method	Peristaltic pump
Seal Of Cyclone/Cylinder	Silicone
Power	2000W
Power Supply	220V, 50-60 Hz
Dimensions	800 × 600 × 900 mm
Packaging Dimensions	1000 × 810 × 1140 mm
Net Weight	83 Kg
Gross Weight	141 Kg

Features

Optional Inert loop for organic solvents

The blower runs until temp <90°C for thermal protection

Automatic deblocking available

Suitable for use on a laboratory table

Tabletop, easy to operate and install

FAQs

1. What are the key factors to consider when selecting this laboratory spray dryer for laboratory use?

When selecting this laboratory spray dryer, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this laboratory spray dryer be calibrated to ensure accurate results?

It is recommended to calibrate this laboratory spray dryer at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this laboratory spray dryer?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this laboratory spray dryer be used with different types of samples, and are there any compatibility considerations?

Yes, this laboratory spray dryer can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the laboratory spray dryer malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.