Oil Content Analyzer T-OCA-S2802

Introduction

Oil Content Analyzer detects oil in water across wide range of 0.001–2000 mg/L. Uses infrared absorption with fast 2-second scans via non-dispersive measurement technology. Supports full-spectrum scanning for precise quantification and accurate peak identification. Achieves low detection limits, ideal for trace analysis in industrial and environmental samples. Oil Content Analyzer enables rapid, dependable testing in wastewater, marine, and process applications.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Oil Content Analyzer is ideal for checking oil levels in wastewater, discharge water, and surface water samples. It’s widely used by environmental labs, treatment plants, and industries looking to stay within regulatory limits. A dependable choice for pollution control, routine monitoring, and on-site analysis.

Specifications

Measurement Range	0.001 to 2000 mg/L (4 cm cuvette)
Detection Limit (Direct)	less than 0.12 mg/L (extraction agent)
Detection Limit (In Water)	less than 0.0012 mg/L (oil concentration in water samples)
Max. Measured Concentration	≤640000 mg/L (dilution measurement); ≤100% oil
Testing Accuracy	±0.5% and ±2%
Repeatability	RSD ≤1%
Zero Stability	±1% per 24 hours
Operating Temperature	5 to 35 °C
Operating Humidity	20% to 80% RH
Linearity	R > 0.999
Wavelength Accuracy	2 cm⁻¹
Wavelength Repeatability	2 cm⁻¹
Wavelength Range	2941 to 4167 nm (3400–2400 cm⁻¹)
Baseline Drift Absorbance	less than 0.001 AU per 60 minutes
Sample Analysis Time	2 sec (non-dispersive); 40 sec (full spectrum scan)
Absorbance Range	0.0000 to 2.000 AU
Power Supply	220V / 50Hz ±10%
Dimensions (L × W × H)	540 × 360 × 150 mm
Weight	15 kg

Features

Sensitive oil detection for trace-level measurement

Quick scan response using IR absorption

Easy and user-friendly operation

Consistent and accurate data output

FAQs

1. What is the main function of this Oil Content Analyzer?

It is a professional laboratory instrument designed for Oil Content Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Oil Content Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Oil Content Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Oil Content Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Oil Content Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.