Oil Content Analyzer T-OCA-S2800

Introduction

Oil Content Analyzer offers to detect oil in 0.001–800 mg/L range. Delivers fast, accurate scans with high accuracy and precision. Ensures reliable readings with RSD ≤1% repeatability. Utilises full-spectrum non-dispersive infrared technology for oil detection. Supports both direct detection and full-spectrum scanning for detailed analysis. Oil Content Analyzer for wastewater, industrial, and environmental monitoring.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Oil Content Analyzer is ideal for wastewater treatment, industrial discharge monitoring, and environmental testing. Used across the petrochemical, mining, and food industries for regulatory compliance. Suitable for labs, environmental agencies, and on-site water quality checks in natural water bodies.

Specifications

Measurement Range	0.001~800 mg/L (4cm cuvette)
Detection Limit	Less than 0.12 mg/L
Max. Measured Concentration	≤640000 mg/L
Testing Accuracy	±0.5% and ±2%
Repeatability	RSD≤1%
Zero Stability	±1%/24 hours
Temperature	5 °C to 35 °C
Humidity	20 % to 80 % RH
Linearity	R＞0.999
Wavelength Accuracy	2 cm⁻¹
Wavelength Repeatability	2 cm⁻¹
Wavelength Range	3400 cm⁻¹~2400 cm⁻¹/85000 px⁻¹～60000 px⁻¹
Baseline Drift Absorbance	Less than 0.001 AU/60 min
Sample Analysis Time	Full spectrum scan：40 sec
Absorbance Range	0.0000～2.000 AU
Power Supply	220V/50 Hz ±10%
Dimension (L × W × H)	540 × 360 × 150 mm
Weight	15 kg

Features

Wide detection range up to 800 mg/L

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Full-spectrum non-dispersive IR detection

High accuracy with ±0.5% precision

Fast scan time: 2–40 seconds

Stable performance with low drift

Compact and lab-friendly design

Works reliably in varied environments

FAQs

1. What is the main function of this Oil Content Analyzer?

It is a professional laboratory instrument designed for Oil Content Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Oil Content Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Oil Content Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Oil Content Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Oil Content Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.