Oil Content Analyzer T-OCA-S2801

Introduction

Oil Content Analyzer detects oil concentrations up to 1000 mg/L. Performs rapid 2-second scans via non-dispersive infrared sensing method. Covers broad spectral range with minimal baseline drift under 0.001AU. Perfect for wastewater treatment, lab testing, and industrial contamination monitoring. Oil Content Analyzer ensures precise, high-speed oil analysis solutions.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Oil Content Analyzer is suitable for wastewater analysis, oil contamination control, and industrial effluent testing. Commonly used in environmental laboratories, oil refineries, and regulatory inspection sites. Ideal for pollution monitoring, quality control, and field-based environmental assessments.

Specifications

Measurement Range	0 to 1000 mg/L (4 cm cuvette)
Detection Limit (Direct)	less than 0.12 mg/L (extraction agent)
Detection Limit (In Water)	less than 0.0012 mg/L (oil concentration in samples)
Max. Measured Concentration	≤640000 mg/L (dilution); ≤100% oil
Testing Accuracy	±0.5% and ±2%
Repeatability	RSD ≤1%
Zero Stability	±1% per 24 hours
Operating Temperature	5 to 35°C
Operating Humidity	20% to 80% RH
Linearity	R > 0.999
Wavelength Accuracy	2 cm⁻¹
Wavelength Repeatability	2 cm⁻¹
Wavelength Range	2941 to 4167 nm (3400–2400 cm⁻¹)
Baseline Drift Absorbance	< 0.001 AU per 60 min
Sample Analysis Time	2 sec (non-dispersive); 40 sec (full spectrum scan)
Absorbance Range	0.0000 to 2.000 AU
Power Supply	220V/50Hz ±10%
Dimensions (L × W × H)	540 × 360 × 150 mm
Weight	15 kg

Features

Broad-range oil detection

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Fast infrared scan speed

Stable and repeatable results

Advanced spectral performance

Easy-to-use interface

FAQs

1. What is the main function of this Oil Content Analyzer?

It is a professional laboratory instrument designed for Oil Content Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Oil Content Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Oil Content Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Oil Content Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Oil Content Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.