Ammonia Gas Detector T-S2MD-S2102

Introduction

Ammonia Gas Detector ammonia and operates in 0.9 to 1.1 atmospheric pressure range. Equipped with electrochemical sensing technology that delivers measurement within ±3% of reading at 25℃. Integrated with sealed and moisture-resistant housing ensures continuous performance from –20 to 40°C. Incorporated with rapid detection that provides response less than 15 seconds. Detector suits cold storage, fertilizer plants, pharma units, chemical sites, oil fields and greenhouses. 

Adopts advanced sensor technology with NIST-traceable calibration certificates. Built-in self-diagnostic function continuously monitors instrument status, ensuring reliable detection results.

Applications

Ammonia Gas Detector supports ammonia detection in industrial plants, cold storage units, agricultural sites, oil fields, refineries, and environmental monitoring zones.

Specifications

Working Pressure Range	0.9 to 1.1 atm
Measurement Accuracy	Less than or equal to ±3% of reading at 25℃
Working Temperature Range	–30 to 50°C (–20 to 40°C continuous)
Response Time	Less than 15s
Measurement Range	0 to 100 ppm / 0 to 1000 ppm / 0 to 5000 ppm
Working Humidity Range	0 to 100%RH (15 to 95%RH recommended)
Baud Rate (RS485)	2400, 4800, 9600
Signal Output	4 to 20mA, 0 to 5V, 0 to 10V, RS485
Protection Class	IP65
Output Current Load	Less than or equal to 600 ohms
Output Voltage Load	Less than or equal to 250 ohms
Power Consumption	RS485: less than or equal to 0.15 W; Analog: less than or equal to 1 W
Power Supply	12 to 24VDC
Dimensions	134 × 100 × 46 mm
Net Weight	0.5 kg

Features

Wall-mounted enclosure 

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Multiple output options

Stable signal 

Waterproof sealed shell

Low power consumption 

Standard Accessories

FAQs

1. What is the main function of this Ammonia Gas Detector?

It is a professional laboratory instrument designed for Ammonia Gas Detector applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Ammonia Gas Detector compared to similar products?

It incorporates advanced technologies including self-diagnostic function, ensuring superior performance in terms of stability, accuracy, and operational convenience. The durable construction and strict quality control also guarantee long service life and low maintenance costs.

3. What regular maintenance is required for this Ammonia Gas Detector?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Ammonia Gas Detector?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Ammonia Gas Detector shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.