Ammonia Gas Detector T-S2MD-S2100

Introduction

Ammonia Gas Detector provides detection range of 0 to 100 ppm. It features real-time data display with two standard relay output channels for alarm signaling. Equipped with multiple mounting options, including wall, pipeline, and flow-type setups for flexibility. Incorporates magnetic and remote-control functionality for safe operation in explosion-prone zones. Gas Detector monitors NH₃ in industrial, utility, agricultural, and food processing areas.

Adopts advanced sensor technology with NIST-traceable calibration certificates. Built-in self-diagnostic function continuously monitors instrument status, ensuring reliable detection results.

Applications

Ammonia Gas Detector is employed for continuous NH₃ monitoring in chemical plants, utilities, agricultural storage, and food processing zones, ensuring reliable performance in confined, hazardous, industrial conditions.

Specifications

Gas Detected	NH₃
Measurement Range	0 to 100 ppm
Detection Principle	Electrochemistry
Resolution	0.1ppm
Accuracy	Less than or equal to ±2 to 5% FS
Display	LED display
Working Temperature Range	-20 to 55℃
Working Pressure	86 to 106 kPa
Humidity	0 to 95%RH
Power Dissipation	Toxic gas: Less than or equal to 2.5W,
Signal Output	4 to 20mA, RS485
Wireless Transmission	LORA
Housing Material	Die-cast aluminum
Electrical Interface	Standard internal screw thread M20 × 1.5
Protection Grade	IP66/68
Explosion-Proof Grade	IECEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb ；ATEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb
Power Supply	24V DC
Dimension	157.8×128.8×69.6 mm
Net Weight	1 Kg
Gross Weight	1.5 Kg

Features

Lightweight 

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

24h online monitoring

Intrinsic safety circuit

Computer connectivity

Die-cast aluminum case

FAQs

1. What is the main function of this Ammonia Gas Detector?

It is a professional laboratory instrument designed for Ammonia Gas Detector applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Ammonia Gas Detector compared to similar products?

It incorporates advanced technologies including self-diagnostic function, ensuring superior performance in terms of stability, accuracy, and operational convenience. The durable construction and strict quality control also guarantee long service life and low maintenance costs.

3. What regular maintenance is required for this Ammonia Gas Detector?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Ammonia Gas Detector?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Ammonia Gas Detector shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.