Portable Ammonia Gas Detector T-S2MD-S2101

Introduction

Portable Ammonia Gas Detector is designed with 0 to 100 ppm measurement range. It features diffusion-type detection for continuous air sampling without pumps or tubing. Equipped with self-test function, it enhances safety by checking battery and device status automatically. Integrates automatic logging of latest 10 alarm events for quick incident tracking. Gas Detector is ideal for monitoring NH3 in health care and agricultural settings.

Adopts advanced sensor technology with NIST-traceable calibration certificates. Built-in self-diagnostic function continuously monitors instrument status, ensuring reliable detection results.

Applications

Portable Ammonia Gas Detector detects ammonia to ensures personal safety in furniture, papermaking, pharmacy, health care, disinfection, fertilizer, livestock, and green production areas.

Specifications

Gas Detected	NH₃
Measurement Range	0 to 100 ppm
Sampling Method	Diffusion
Measurement Principle	Electrochemistry
Response Time	15 to 30s
Resolution	0.1ppm
Accuracy	Less than or equal to ±2%FS
Display	Shows gas name, concentration unit, measured value, and battery power
Working Temperature Range	-20 to 55℃
Humidity	0 to 95%RH (non-condensing)
Working Pressure	86 to 106kpa
Units	PPM, mg/m3
Alarm Mode	Sound, light, vibration alarm
Alarm Type	Low alarm, high alarm, STEL, TWA, low battery alarm
Buzzer Sound	Greater than or equal to 95db
Protection Grade	IP68
Explosion-Proof Grade	IECEx, Ex ia IIC T4 Ga; ATEX, II 1G Ex ia IIC T4 Ga
Power Supply	Lithium polymer battery
Dimension	90×60×33mm
Weight	125g

Features

Settable alarm points

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Compact size

No calibration

Red LED alerts

Alligator clip

FAQs

1. What is the main function of this Ammonia Gas Detector?

It is a professional laboratory instrument designed for Ammonia Gas Detector applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Ammonia Gas Detector compared to similar products?

It incorporates advanced technologies including self-diagnostic function, ensuring superior performance in terms of stability, accuracy, and operational convenience. The durable construction and strict quality control also guarantee long service life and low maintenance costs.

3. What regular maintenance is required for this Ammonia Gas Detector?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Ammonia Gas Detector?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Ammonia Gas Detector shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.