Introduction
A high purity water system produces purified water for laboratory use. It is widely used in analytical and biological labs. The system ensures water quality. It solves contamination issues in experiments. By providing multi-stage purification, it supports research accuracy.
High Purity Water System LHPW-T2010
High Purity Water System provides 1.0 to 1.5 liters per minute of purified water for reliable laboratory operations. It features continuous recirculation to maintain stable water purity....
High Purity Water System LHPW-T2023
High Purity Water System is designed to operate with inlet water temperatures between 5°C to 40°C. It combines reverse osmosis (RO), deionization, and optional UV sterilization to prod...
High Purity Water System LHPW-T2022
High Purity Water System features a 3/4-inch inlet water tube for efficient water intake. It includes a dual-system backup control for enhanced operational reliability. It offers a remot...
High Purity Water System LHPW-T2021
High Purity Water System operates using tap water with a conductivity of less than 400 µS/cm at 25°C. It features a quiet, stable high-pressure pump for efficient operation. It offers ...
High Purity Water System LHPW-T2020
High Purity Water System features reverse osmosis (RO) technology with a desalination rate greater than or equal to 98%. It features a real-time multi-parameter display for continuous mo...
High Purity Water System LHPW-T2013
High Purity Water System operates within a temperature range of 5°C to 40°C. It consistently delivers pure water while maintaining system hygiene. The unit features a compact, space-ef...
High Purity Water System LHPW-T2012
High Purity Water System operates within a 0.1 to 0.5 MPa pressure range. It ensures reliable, efficient performance with user-friendly operation. The system features automatic monitorin...
High Purity Water System LHPW-T2011
High Purity Water System requires tap water as its feed source, with a conductivity of less than 2000 µS/cm. It incorporates a combination of reverse osmosis, deionization, electrodeion...
High Purity Water System LHPW-T2010
High Purity Water System offers a reverse osmosis (RO) production rate of 100 water. The space-saving configuration makes it ideal for laboratory environments with limited floor space. I...
Standards
ISO 3696:1987-Water for analytical laboratory use-Specification and test methods
GB/T 6682-2008-Water for analytical laboratory use-Specification and test methods
ASTM D1193-06(2018)-Standard Specification for Reagent Water
Complies with the above standards, but is not limited to them.
Features
1. High purity water system built to deliver consistently high-purity water using advanced technology.
2. Multi-stage purification reduces dissolved solids, organics and microorganisms.
3. Integrated monitoring displays water quality parameters for verification.
4. Reliable design for continuous laboratory water supply.
5. Suitable for analytical instruments, sample preparation and laboratory applications.
FAQ
Q1: What is the high purity water system mainly used for?
A: It is used to produce high-purity water for analytical instruments, sample preparation, reagent dilution and general laboratory applications where water quality affects results. Multi-stage purification reduces contaminants that could interfere with analysis.
Q2: What standards does the high purity water system comply with?
A: The system is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for water purification equipment. Produced water quality should meet the applicable grade requirements for the intended analytical use. Compliance documentation can be provided on request.
Q3: What is the warranty period for the system and key components?
A: The complete system carries a 12-month warranty covering the purification unit, controller and housing. Filters, membranes, cartridges and accessories are excluded as consumables. Damage from improper water supply or unauthorised repair is not covered.
Q4: Is the system difficult to operate?
A: Operation is simple: monitor displayed quality parameters and replace consumables as indicated. Basic training in water quality management is recommended. The manual explains installation, operation and maintenance, and remote guidance is available.
Q5: What is the typical lead time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Does the system require calibration or verification?
A: Water quality sensors should be verified periodically against calibrated references, typically every 6 to 12 months. The system is factory tested before delivery. Optional verification service can be arranged.
Q7: Are consumables or spare parts universal?
A: Filters, membranes and cartridges are consumables available from our channel and are compatible with common purification systems. No proprietary locked parts are required. Provide the model and serial number when ordering.
Q8: Can the system be customised?
A: Yes, options include different capacities, purification stages, storage tanks, 220V or 110V supply and remote monitoring. We confirm each option before order confirmation.
Q9: Is installation and commissioning included?
A: The system can be installed by following the manual, including plumbing, electrical checks and a flushing cycle. Remote guidance is available during commissioning. On-site installation can be arranged separately.
Q10: What water should not be fed into this system?
A: Feed water with very high hardness, oil or aggressive chemicals may damage membranes and requires pretreatment. Water not meeting the recommended feed quality should be treated before use. Follow the system manual for feed water requirements.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.