Vibrating Magnetometer System VMS2022

Introduction

Vibrating Magnetometer System operates at RT and offers an extensive measuring range from 35×10⁻⁹ to 10³ emu. It generates a magnetic field ranging from 0.2 to 8T and vibrates at frequencies between 55 Hz and 85 Hz. Incorporated with a magnetic hysteresis loop (M-H) that analyzes key features such as Hc, Ms, and Mr. Our magnetometer is designed to capture magnetic property changes every 10 milliseconds for high-speed testing.

Applications

Vibrating Magnetometer System is utilized for precise measurement and analysis of magnetic properties in various fields including materials science, magnetic recording media, magnetic nanoparticles, geophysics, and magnetocaloric effect research.

Specifications

Measuring Range	35×10⁻⁹ to 10³ emu
Magnetic Field	0.2 to 8T
Magnetic Field (Fe Co Pole Head)	Sample Temp Air Gap Sample Area Magnetic Flux Density Room.Temp 7.5mm 3.5 mm 2.722T 12mm 8mm 2.462T
Measuring Temperature	RT
Magnetic Moment Measurement 01	Noise 0.1s/pt (RMS) 1s/pt(P-P) 1s/pt(RMS) Room.Temp @3.5mm 150nemu 800nemu 80nemu
Magnetic Moment Measurement 02	Noise 1s/pt (P-P) 10s/pt(RMS) 1s/pt(RMS) Room.Temp @3.5mm 380nemu 35 nemu 80nemu
Magnetic Moment Measurement<br> (With Cryostat in Place)	RMS Noise 100MS/point 10S/point Sensitivity 2.5 × 10⁻⁹ A m⁻ ² 1.0 × 10⁻⁹ A m⁻ ²
Magnetic Moment Stability	0.05% RMS of full scale/day (fixed coil spacing, constant temperature, and magnetic field, maximum range, stability of 2-hour heat balance required)
Magnetic Moment Repeatability	± 0.5% (data obtained by loading and removing samples ten times in the same coil spacing and range)
Magnetic Moment Accuracy	± 1% (compared with the NIST standard sample)
System Sampling Interval	0.01 to 10 s (continuous mode 10 ms) the time constant of the lock-in amplifier is fixed 100ms, and the low-pass drops sharply by 24dBb/oct
Vibration Amplitude	2 to 8mm
Vibration Frequency	55 to 85 Hz
Magnetic Field Accuracy	0.01
Magnetic Field Resolution	1 mOe
Magnetic Field Stability	100 mOe
Lifting Accuracy	0 to 300mm
Rotating Accuracy	0.01°
Rotating Range	Continuous
Tested Materials	Bulk materials powders, thin films, single crystals, and liquids
Power Supply	Three Phase: AC 380V±5% Single Phase: AC 220V±5%
Water Chiller Inner Machine	48 × 72 × 102cm
Water Chiller Outer Machine	96 × 41 × 84cm
Control Cabinet Dimension	66 × 83 ×100cm
Electromagnet and Power Supply Dimension	90 ×90 ×110cm
Vibrating Head and Support Holder Dimension	110 × 113× 100cm
Vibrating Head and Support Holder Weight	80kg
Water Chiller Inner Machine Weight	90kg
Control Cabinet Weight	120kg
Electromagnet and Power Supply Weight	150kg

Features

Equipped with user-friendly software.

360° continuous rotating vibration head.

Adjustable pole gap for accuracy.

Electric lifting system for sample positioning.

Precise laser sensor detects variations.

Integrated with signal collection coil and gauss meter probe.

FAQs

1. What are Vibrating Magnetometer Systems used for?

Vibrating Magnetometer Systems are used for rapid and precise measurement of magnetic properties in materials.

2. How do Vibrating Magnetometer Systems support high-speed testing?

Vibrating Magnetometer Systems deliver high-speed measurement capabilities for quick and efficient magnetic analysis.

3. What sensing technology is used in Vibrating Magnetometer Systems?

Vibrating Magnetometer Systems use precise laser sensors to detect minute variations in magnetic fields.

4. How do Vibrating Magnetometer Systems ensure measurement accuracy?

Vibrating Magnetometer Systems are designed to provide exceptional accuracy and reliable, repeatable results.

5. What software features are included in Vibrating Magnetometer Systems?

Vibrating Magnetometer Systems are equipped with user friendly software for easy control and data analysis.

6. Where are Vibrating Magnetometer Systems commonly used?

Vibrating Magnetometer Systems are commonly used in industrial environments and research laboratories for magnetic material analysis.