Introduction
A slide stainer is used for staining biological tissue slides in laboratory diagnostics. It is widely used in pathology laboratories. The system ensures consistent staining quality. It solves variability in manual staining. By providing controlled staining processes, it improves diagnostic accuracy.
Automatic Slide Stainer LASS-T2041
Automatic Slide Stainer is a fully automated staining system designed for high-throughput histopathology laboratories. It supports up to 720 slides per hour for consistent staining resul...
Automated Tissue Slide Stainer LATS-T2020
Automated Tissue Slide Stainer is capable of processing over 75 slides per batch using 18 reagent cylinders. It features a large 7-inch color touchscreen with an intuitive English menu a...
Automatic Slide Stainer LASS-T2040
Automatic Slide Stainer features three staining racks, each capable of holding 20 slides, and supports an infinite loop working mode. Its dyeing rack features an automated identification...
Automatic Slide Stainer LASS-T2030
Automatic Slide Stainer can process up to 65 tissue samples in a single cycle, with each cylinder holding 1000 mL of reagent. It features a color touch screen with an -style interface, m...
Automatic Slide Stainer LASS-T2020
Automatic Slide Stainer can process at least 200 specimen slides per hour, depending on the selected staining program. It is equipped with advanced a control system and a user-friendly e...
Automatic Slide Stainer LASS-T2011
Automatic Slide Stainer handles up to 45 slides for effective and uniform staining. It supports 18 reagent tanks, each with a 1000 mL capacity for uninterrupted operation. The system pro...
Semi-T20utomatic Tissue Slide Stainer LSTS-T2010
Semi-Automatic Tissue Slide Stainer holds up to 48 slides and 64 reagents. It dispenses reagents accurately with a minimum drop of 50 µl. Our semi-automatic tissue Slide stainer support...
Automatic Slide Stainer LASS-T2010
Automatic Slide Stainer is an electrically designed Automated Slide Stainer with a dyeing frame capacity of 30 slides. Dyeing procedures can be displayed on the operation interface in re...
Automated Tissue Slide Stainer LATS-T2010
Automated Tissue Slide Stainer is an ergonomically designed automated tissue-slide stainer comprised with intelligent automatic water influx/efflux/drainage control system, offers 18 cup...
Standards
ISO/TS 23824:2024-Medical laboratories-Guidance on application of ISO 15189 in anatomic pathology
ISO 15189:2022-Medical laboratories-Requirements for quality and competence
Complies with the above standards, but is not limited to them.
Features
1. Smooth advance and retraction reduce chatter and specimen damage.
2. Integrated waste tray keeps the cutting area clean.
3. Precise specimen orientation improves section quality.
4. Orientation and trimming functions align the specimen block.
5. Ergonomic handwheel and trim functions reduce operator fatigue.
FAQ
What are the main applications of the Slide Stainer?
The Slide Stainer is used in histology and pathology to prepare tissue sections, process samples and handle slides for microscopic diagnosis. It supports hospital laboratories, research and teaching where thin, consistent sections and clean staining are required.
What standards does the Slide Stainer comply with?
The equipment is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for histology laboratory equipment, with workflows following standard histopathology practice. Compliance documentation can be provided on request.
What warranty comes with the Slide Stainer?
A 12-month warranty applies to the complete equipment against defects in materials and workmanship. It excludes consumables, wearing components and accidental or misuse damage. Our service team handles claims against the serial number, and longer cover can be arranged.
How easy is the Slide Stainer to use?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the Slide Stainer be calibrated?
Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.
Where do we get replacement parts?
No proprietary consumable contract is required; standard parts are available from us and common laboratory suppliers. Our service team can supply a recommended parts list for the model. Most routine spares are held for quick delivery.
Can the Slide Stainer be customised?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Do you provide on-site installation?
The unit is delivered ready for set-up, with clear commissioning steps in the manual. We provide remote technical support during installation. For larger or regulated systems, a factory-trained engineer can attend on site on request.
What should be avoided when using the Slide Stainer?
Do not cut with damaged blades, force the mechanism or handle reagents without protection. Change blades carefully, clean the bath and fix tissue properly. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.