Introduction
A single station glove box is a sealed enclosure with one work station, used for the handling of the materials in a controlled atmosphere, such as an inert gas atmosphere, and it is used in the chemistry, the materials science, the pharmaceutical, and the research laboratories for the handling of the air-sensitive and the moisture-sensitive materials. The single station glove box consists of a sealed chamber with a transparent window, one or more pairs of gloves attached to the ports, which allow the operator to handle the materials inside the chamber without breaking the seal, an antechamber or a transfer port for the introduction and the removal of the materials, and a gas control system for the maintenance of the atmosphere inside the chamber, such as the nitrogen or the argon; the glove box provides a controlled atmosphere, with features such as the purification of the gas, the monitoring of the oxygen and the moisture, and the pressure control, and it is used for the handling of the air-sensitive compounds, for the weighing and the preparation of the samples, for the assembly of the electrochemical cells, for the handling of the reactive materials, and for many other applications; the single station glove box is available in various sizes and configurations, with features such as the UV lamp, the electrical outlets, and the shelves, and it is an essential equipment for the handling of the sensitive materials. Single station glove boxes are used in the chemistry and the materials science laboratories, in the pharmaceutical industry, in the battery research, and for many other applications. With their controlled atmosphere, single station glove boxes are essential for the handling of the sensitive materials.
Single Station Glove Box LSGB-T2013
Single Station Glove Box offers 4 glove compartments and creates an ultra- clean atmosphere with impurity levels as low as 0.1 ppm. The glove box is equipped with advanced filter which h...
Single Station Glove Box LSGB-T2012
Single Station Glove Box offers 3 glove compartments and creates an ultra- clean atmosphere with impurity levels as low as 0.1 ppm. The gloves are made of butyl rubber for better grip an...
Single Station Glove Box LSGB-T2011
Single Station Glove Box features 2 glove ports and removes H2O and O2 from the isolator. It creates an ideal inert atmosphere with low impurity levels of up to 0.1 ppm. Also, it feature...
Single Station Glove Box LSGB-T2010
Single Station Glove Box features a sealed stainless steel chamber, maintaining moisture and oxygen levels below 1 ppm. It includes a gas purification system supporting nitrogen and argo...
Standards
ISO 14644-7:2004-Cleanrooms and associated controlled environments-Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
Complies with the above standards, but is not limited to them.
Features
1. Single station glove box for controlled enclosed handling.
2. Compact glove box with one glove port set and gas purge.
3. For chemistry, materials and pharmaceutical laboratory use.
4. Includes chamber, gloves, antechamber, gas ports and manual.
5. Handles sensitive or hazardous materials in an enclosed workspace.
FAQ
Q1: What scenarios is this glove box used for?
A: It provides a single-user enclosed chamber for handling air-sensitive chemicals, hazardous powders or materials that must be isolated from the ambient environment, with glove ports and an antechamber. Gas inlet and outlet allow inert purging.
Q2: What standards does it comply with?
A: It follows relevant containment and laboratory safety practices, OSHA chemical handling guidance and related GB/T standards, with glove integrity and gas tightness verified. Biological use is not a substitute for a certified biosafety cabinet.
Q3: What is the warranty?
A: The glove box carries a 12 to 24 month warranty covering the chamber, frame and ports. Gloves and gaskets are wear parts replaced when degraded. Damage from chemical attack, over-pressure or unauthorized modification is excluded.
Q4: Is it hard to operate?
A: Operation is straightforward for trained lab staff: insert hands through gloves, transfer items via the antechamber and purge with inert gas as needed. We provide a manual and guidance on leak checks and glove care.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: Perform leak and glove integrity checks periodically and calibrate any oxygen monitor. For regulated use keep leak test and maintenance records.
Q7: Are consumables universal?
A: Gloves must match port size and gaskets are chamber-specific, while gas tubing is universal. Ongoing cost includes gloves and gaskets.
Q8: Can it be customized?
A: Options include chamber size, number of glove ports, antechamber, inert gas system, HEPA filtration, antistatic acrylic and viewing features.
Q9: Is installation included?
A: Standard delivery includes the glove box and manual; gas regulators are separate. Setup is performed by the user, with training available.
Q10: What materials are compatible?
A: It handles chemicals, powders and materials compatible with the chamber, excluding chemicals that attack the enclosure, strict sub-ppm inert needs beyond its rating, or high vacuum service.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.