Introduction
Dispensing Peristaltic Pump is a specialized fluid transfer device designed for accurate and contamination-free dispensing in various laboratory and industrial applications. Operating on the peristaltic principle, it utilizes rotating rollers to compress a flexible tube, creating a pulsatile flow that dispenses liquids with precision. This pump is widely employed in fields such as pharmaceuticals, biotechnology, and analytical chemistry, where precise dosing and minimal cross-contamination are crucial. With adjustable flow rates, programmable dispensing parameters, and user-friendly controls, it offers versatility in handling different liquids and volumes.
Dispensing Peristaltic Pump T-S215DPP
Dispensing Peristaltic Pump provides precise and flexible liquid dispensing with a flow rate of 0.69 to 12000 mL/min. It features a speed range of 0.1 to 600 rpm, ensuring optimal perform...
Dispensing Peristaltic Pump T-S213DPP
Dispensing Peristaltic Pump features a flow rate range of 0.211 to 3600 mL/min, ensuring accurate and consistent liquid transfer. It supports a speed range of 0.1 to 600 rpm, providing st...
Dispensing Peristaltic Pump T-S214DPP
Dispensing Peristaltic Pump features a flow rate range of 0.3 to 6000 mL/min, ensuring efficient and precise fluid handling. It operates at a speed range of 0.1 to 600 rpm, enabling accur...
Dispensing Peristaltic Pump T-S212DPP
Dispensing Peristaltic Pump is a positive displacement pump with mechanical keypad for controlling direction and speed. Specially designed pump heads pump out fluids with flow rates based...
Dispensing Peristaltic Pump T-S211DPP
Dispensing Peristaltic Pump provides a flow rate range from 0.0053 to 1808 mL/min, supporting both micro and bulk fluid dispensing tasks. It operates at a speed range of 0.1 to 350 rpm, o...
Dispensing Peristaltic Pump T-S210DPP
Dispensing Peristaltic Pump features a maximum flow rate of 1440 mL/min, ensuring precise and consistent fluid transfer. It supports a speed range of 10 to 300 rpm, delivering reliable a...
Standards
ISO/TS 6417:2025-Microfluidic pumps-Symbols and performance communication
ISO 13137:2022-Workplace atmospheres-Pumps for personal sampling of chemical and biological agents-Requirements and test methods
Complies with the above standards, but is not limited to them.
Features
1. Gas-ballast or purge options help handle condensable vapours.
2. Quick-release fittings speed tubing changes.
3. Gauge and regulator allow clear control of output.
4. Integrated inlet trap protects the pump from particles.
5. Chemical-resistant wetted parts handle a range of media.
FAQ
What are the main applications of the Dispensing Peristaltic Pump?
The Dispensing Peristaltic Pump is used to move, evacuate or transfer fluids and gases in laboratory and process work. It supports filtration, vacuum drying, aspiration, chromatography and sample handling.
Which standards and regulations apply to the Dispensing Peristaltic Pump?
The pump is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for laboratory pumps. Vacuum and pressure ratings should match the application. Compliance documentation can be provided on request.
What does the warranty cover?
We provide a 12-month limited warranty on the instrument and its key working parts. Consumables, accessories and parts subject to normal wear are excluded, as is damage caused by incorrect operation or maintenance. An extended service plan is available on request.
Will staff need special training?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Dispensing Peristaltic Pump need calibration or verification?
The unit is calibrated and tested before delivery. For ongoing accuracy, verify it against traceable reference standards every 6 to 12 months, or according to the laboratory quality schedule. We can arrange calibration service and certificates where required.
Where do we get replacement parts?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Are options or configurations available?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
Is installation and commissioning included?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What should be avoided when using the Dispensing Peristaltic Pump?
Do not pump incompatible, corrosive or particulate media without protection, run dry or block exhaust. Use traps and inlet filtration. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.