Introduction
A coating machine applies uniform coatings to material surfaces. It is widely used in materials research and industrial production. The system ensures consistent film formation. It solves uneven manual coating. By providing controlled application, it supports surface engineering.
Magnetron Coating Machine LMMC-T2011
Magnetron Coating Machine has a bottom-mounted target design with a sample stage size of 100 mm. It has an advanced vacuum system to achieve a vacuum level of ≤5×10⁻⁴ Pa. The rotatab...
Magnetron Coating Machine LMMC-T2012
Magnetron Coating Machine designed for precision coating with a 50 mm sample stage, offering adjustable speeds up to 10 rpm. It offers an excellent vacuum with a composite vacuum gauge. ...
Magnetron Coating Machine LMMC-T2013
Magnetron Coating Machine has a sample stage of Ф 150 mm which can rotate up to a speed of 20 rpm. It features two magnetron targets and DC power supplies. The system is equipped with a...
Magnetron Coating Machine LMMC-T2010
Magnetron Coating Machine features a magnetron sputtering head with a diameter of 50.8 mm and a maximum thickness of 3 mm. It has a vacuum chamber, made of high purity quartz, ensuring d...
Plasma Sputtering Coater LPSC-T2011
Plasma Sputtering Coater supports samples with a diameter of up to 100 mm. It incorporates a heating sample stage for which the temperature can reach up to 500℃ for better adhesion. The...
Double-Sided Dip Coating Machine LDDM-T2010
Double-Sided Dip Coating Machine supports adjustable coating thickness from 6 µm to 200 µm, with a maximum mechanical speed of 1 m/min. It is equipped with advanced a precision wire ro...
Plasma Sputtering Coater LPSC-T2010
Plasma Sputtering Coater ensures uniform coating with a 100 mm rotatable sample stage and an adjustable rotation speed of 1rpm to 20 rpm. It features a touch screen interface, offering a...
Belt Cast Film Coating Machine LBFM-T2010
Belt Cast Film Coating Machine with a transverse speed ranging from 10 mm/s to 80 mm/s. It utilizes a vacuum suction system, ensuring the substrate is firmly held in place without wrinkl...
Casting Drying Coater LCDC-T2010
Casting Drying Coater a precision film applicator with adjustable speeds ranging from 10 mm/s to 100 mm/s. It employs a precision film applicator, such as a wire bar or doctor blade, to ...
Heating Coating Machine LHCM-T2010
Heating Coating Machine has a coating speed of 0 to 100 mm/s with accuracy of 10 mm/s. It equips a strong wind heating system for drying. The incorporated vacuum aluminium plate provides...
Doctor Blade Coating Machine LDCM-T2010
Doctor Blade Coating Machine with a continuously variable motor that allows fine control over the coating speed, achieving a maximum speed of 100 mm/s. It features a coating platform mad...
Vacuum Spin Coater LVSC-T2010
Vacuum Spin Coater offers a maximum coating capacity for 4-inch wafers with 134 mm chamber size. It is designed with an anodic oxidation aluminium shell for longer use. Equipped with a b...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Bench and floor models fit laboratory and pilot use.
2. Data and timer options support test records.
3. Programmable settings store application parameters.
4. Enclosed design reduces operator exposure and overspray.
5. Clear display shows pressure and process values.
FAQ
What are the main applications of the Coating Machine?
The Coating Machine is used to apply or prepare uniform coatings and films on specimens and panels for testing or production. It supports paint, corrosion, adhesion and quality-control work requiring consistent application.
What standards does the Coating Machine comply with?
The equipment is designed with reference to IEC 61010 electrical safety, applicable coating and film-application standards and relevant GB/T methods. Application parameters should follow the standard. Compliance documentation can be provided on request.
How long is the warranty period?
We provide a 12-month limited warranty on the instrument and its key working parts. Consumables, accessories and parts subject to normal wear are excluded, as is damage caused by incorrect operation or maintenance. An extended service plan is available on request.
Will staff need special training?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the Coating Machine be calibrated?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are the consumables universal or proprietary?
No proprietary consumable contract is required; standard parts are available from us and common laboratory suppliers. Our service team can supply a recommended parts list for the model. Most routine spares are held for quick delivery.
Are options or configurations available?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Is installation and commissioning included?
Most models can be commissioned by following the manual, including positioning, connections, checks and a first test run. Remote guidance is available during start-up. On-site installation, commissioning and training can be arranged separately where required.
What maintenance and safety points matter?
Do not spray flammable or toxic coatings without extraction, use blocked nozzles or exceed pressure limits. Ventilate and clean equipment after use. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.