Introduction
Analytical equipment is a broad category of the instruments and the devices used for the analysis of the chemical, the physical, and the biological properties of the samples, and it is used in the research, the industry, the quality control, the environmental monitoring, and the many other applications. The analytical equipment includes the spectrometers, such as the UV-visible, the infrared, the atomic absorption, and the mass spectrometers; the chromatographs, such as the gas, the liquid, and the ion chromatographs; the analyzers, such as the elemental, the moisture, and the particle analyzers; the titrators; the microscopes; the balances; and the many other instruments, and it is used for the qualitative and the quantitative analysis, for the identification and the quantification of the compounds, for the characterization of the materials, and for the monitoring of the processes; the analytical equipment is used in the chemistry and the biology laboratories, in the pharmaceutical and the food industry, in the environmental monitoring, in the materials, and in the many other fields, for the quality control, for the research and the development, for the compliance, and for many other applications, and it is available in various types and the configurations, with features such as the automation and the data management; the analytical equipment is essential for the modern analysis. Analytical equipment is used in the laboratories, in the industry, in the research institutions, in the environmental monitoring, and for many other applications. With its range, analytical equipment is essential for the analysis and the quality control.
Analytical HPLC System LAHS-T2010
Analytical System is a binary pump-type system with a pump flow range of 0.001 to 10.000mL/min. It incorporates a mainstream split design for comprehensive system testing. Utilizes a new...
Analytical HPLC System LAHS-T2010
Analytical System features a Quaternary Pump with 0.001 to 10 ml/min pump flow rate. It incorporated a UV-Vis detector having a wavelength range of 190 to 800 nm. It is equipped with adv...
Portable Airborne Particle Counter LPPC-T2011
Portable Airborne Particle Counter offers a flow rate of 50 L/min. Equipped with six channels that simultaneously assess various particle sizes. Employs laser technology for accurate det...
HPLC system LHLC-T2010
This system is incorporated with advanced high pressure injection technique. The detector is equipped with advanced 24 bits AD transducer to assure low noise, low drift and high sensibil...
Portable Airborne Particle Counter LPPC-T2010
Portable Airborne Particle Counter offers a flow rate of 2.83 L/min. Equipped with six channels to measure different particle size ranges simultaneously. Employs laser technology for acc...
HPLC system LHLC-T2011
This model of gradient system is equipped with advanced 2 sets of high-pressure constant-current pump and ultraviolet detector. Its microprocessor reciprocating plunger pump comes with f...
Nano Spectrophotometer LNS-T2011
Nano Spectrophotometer with full spectrum covers a wide wavelength range of 190 to 850 nm. It requires only 0.3 - 2 µl sample for measurement which takes place within 5 seconds. It uses...
Portable Spectrophotometer LSP-T2012
Portable Spectrophotometer is a sophisticated instrument used to measure and analyse the colour of materials. Flexible, lightweight, and portable enough to transport it across various in...
Laser Particle Size Analyzer LLPA-T2010
Laser Particle Size Analyzer is a fully automatic unit integrated with wet and dry dispersion. With array detector and silicon photodetectors. Built-in sample dispersion system and uncon...
Laser Particle Size Analyzer LLPA-T2010
is an intelligent dry laser particle size analyzer, comprised with scattering principle and high-sensitive ring photoelectric detector, offers 0.1 μm to 2000 μm of measuring range. Wit...
Laser Particle Size Analyzer LLPA-T2011
is an intelligent dry laser particle size analyzer, comprised with scattering principle and high-sensitive ring photoelectric detector, offers 0.1μm to 300 μm of measuring range. With ...
Nano Spectrophotometer LNS-T2010
Nano Spectrophotometer is a compact and table-top unit comprised with UV-silicon photocell detector and UV- light source, offers 260 nm and 280 nm of fixed wavelength range with 0.5 mm o...
Rotational Viscometer LVM-T2030
Rotational Viscometer is a Brookfield rotational viscometer, adopted with advanced mechanical design technologies and manufacturing techniques. Features 20 ml sample cylinder with temper...
Single Beam UV-Visible Spectrophotometer LUS-T2010
Single Beam UV-Visible Spectrophotometer is a compact, table top unit, comprising Silicon photodiode detector, Tungsten and Deuterium lamp as light source. Features 200 nm to 1000 nm wav...
Portable Spectrophotometer LSP-T2011
Portable Spectrophotometer adopts 1000 line precision blazed grating as the spectroscopic element, the silicon photocell array with large photosensitive area as the detector. The full sp...
Portable Spectrophotometer LSP-T2010
Portable Spectrophotometer adopts 1000 line precision blazed grating as the spectroscopic element, the silicon photocell array with large photosensitive area as the detector. The full sp...
Rotational Viscometer LVM-T2020
Rotational Viscometer is a floor standing rotational viscometer used to measure viscosity of fluid sample at specified shear rates. Its viscosity ranges from 40.2 KU to 141.0 KU, 32 g to...
Rotational Viscometer LVM-T2012
The rotational Viscometer with stylish and modern technology, measures viscosity very quickly and accurately. It does measure & save 30 pcs test data. It is used in any area that require...
Rotational Viscometer LVM-T2010
Rotational Viscometer operates at a rotating speed of 0.1 to 200 rpm, allowing users to perform viscosity analysis under shear conditions. With a wide measuring range of 6 to 6,000,000 c...
Rotational Viscometer LVM-T2010
Rotational Viscometer measures viscosity in the range of 1 to 100000 Mpa. S with an accuracy of ±1%. This device operates on a built-in measuring range ensures error-free results. Our r...
Rotational Viscometer LVM-T2011
Rotational Viscometer accurately measures viscosity ranging from 1 to 100000 Mpa. S with a ±0.5% error. It is a modern rotational viscometer with advanced technology. It’s technology a...
Rotational Viscometer LVM-T2011
Rotational Viscometer accurately measures viscosity from 1 to 2,000,000 mPa. S with a ±1% error for Newtonian liquids. Its optional temperature probe allows real-time viscosity measurem...
Rotational Viscometer LVM-T2010
Rotational Viscometer measures viscosity within a range of 0.1 to 100,000 mPa·s with an accuracy of ±1%. It is suitable for studying liquid flow properties. Its optional temperature pr...
Sample Concentrator LSCO-T2010
Sample Concentrator is a microprocessor based controlled instrument using high-purity aluminium as heat conducting medium having temperature range of +5 ℃ to 160 ℃. The models have air...
Sample Concentrator LSCO-T2011
Sample Concentrator is a microprocessor based controlled instrument using high-purity aluminium as heat conducting medium having temperature range of +5 ℃ to 160 ℃. The models have air...
Nano Spectrophotometer LNS-T2010
Nano Spectrophotometer with full spectrum covers a wide wavelength range of 190 to 850 nm. It requires only 0.3 - 2 µl sample for measurement which takes place within 5 seconds. It uses...
Manual Polarimeter LPMR-T2010
Manual Polarimeter with with 589 nm filter works as light source. This analytical equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high p...
ICP Spectrometer LICP-T2010
Spectrometer is an instrument which measures elements in ppb levels with least interference and reduces the time taken for analysis by detecting 5 to 6 elements in 1 min. Excellent analy...
Portable Dry-lock Temperature Calibrator LPDTC-T2011
Portable Dry-Block Temperature Calibrator delivers a temperature range from 33°C to 660°C. It features a display resolution of 0.001°C for precise measurements. Integrated temperature...
Manual Silt Density Index Tester LSDI-T2020
Manual Silt Density Index Tester operates with a 0.45 µm, 47 mm membrane filter and 0.24–0.5 MPa feed pressure range for accurate measurement. Constructed with a durable 304 stainless ...
Handheld LIBS Spectrometer LHLS-T2010
Handheld delivers stable operation within an operating temperature range of 0 to 40 °C. It features a spectral resolution of <0.2 nm across a wavelength range of 250 to 415 nm. It provi...
Vertical Planetary Ball Mill LPBM-T2016
Vertical Planetary Ball Mill offers a total capacity of 0.4 L with 100 ml mill jar capacity. It can accommodate 4 jars simultaneously, improving the grinding efficiency. With a thick wel...
Ion Chromatography System LICS-T2024
Ion Chromatography System operates at a maximum pressure of 42 MPa (6000 psi) ensuring stable high-performance ion separation. Integrated single-chassis construction minimizes dead volum...
Analytical HPLC System LAHS-T2013
Analytical System features a Dual Binary High-Pressure Pump with 4 solvent channels. It has 2 detectors that can detect wavelengths from 190 to 800 nm. This detector features an automati...
Ultra Centrifugal Mill LUCM-T2010
Ultra Centrifugal Mill offers smooth and reliable material reduction with its <10 mm feed size and adjustable 6000–18000 rpm speed range. Operates with two-stage crushing samples with r...
Portable Coal Content Analyzer LPCA-T20100
Portable Coal Content Analyzer featuring ≤1.0% ash deviation for clean coal and ≤2.5% for power coal. It utilizes dual nuclear and microwave measurement technologies for precise readin...
Double Beam UV-Vis Spectrophotometer LUS-T2044
Double Beam UV-Vis Spectrophotometer offers fast performance, completing a full spectrum scan in 2 seconds at 30,000 nm/min. It operates with a minimum spectral bandwidth of 0.2 nm, ens...
Handheld Raman Spectrometer LHRS-T2012
Handheld Raman Spectrometer delivers fast molecular identification using a high-performance 1064nm nm laser system. Its compact ergonomic design integrates real-time spectral processing ...
Portable Digital Viscometer LPV-T2010
Portable Digital Viscometer offers four rotor options (B1, B2, B3, and B4) and multiple speed settings to suit various viscosities. With a measurement scope of 25 to 150,000 mPa.s, it de...
Automatic Particle Counter LAPC-T2010
Automatic Particle Counter features wide detection range, capable of identifying particles from 0.8μm to 500μm. The particle counter offers 32-channel configuration allowing custom par...
Portable Raman Spectrometer LPRSM-T2010
Portable Raman Spectrometer offers a spectral range of 200 to 3500 cm⁻¹ with an ultra-high sensitivity, - cooled detector. It is equipped with advanced powerful embedded software that ...
Semi-T20utomatic Capsule Filling Machine LCFM-T2011
Semi-automatic Capsule Filling Machine helps achieve scalable production with a yield of 15,000–25,000 capsules/hour. It is crafted from 100% stainless steel 304 (not copper), ensuring ...
Atomic Absorption Spectrophotometer LAAS-T2030
Atomic Absorption Spectrophotometer features a 1000mm focal length Czerny-Turner spectrometer with a high-density holographic grating. This spectrophotometer provides exceptional resolut...
Handheld Airborne Particle Counter LHPC-T2012
Handheld Airborne Particle Counter offers a measurement range of 0 to 1000µg/m³ for accurate monitoring of airborne particulate matter. It supports zero calibration with a one-button f...
Double Beam UV/Vis Spectrophotometer LUS-T2070
Double Beam UV/Vis Spectrophotometer offers a Czerny-Turner (CT) design with a 1200-line grating for superior accuracy and stability. It features ±0.3nm wavelength accuracy and ±0.3%T ...
Grain Moisture Meter LGMM-T2013
Grain Moisture Meter is a testing instrument that is designed to measure moisture in grains to reduce decay or damage to the grains. Its comes with a blacklight feature showing instant r...
Gas Chromatography LGC-T2010
Gas Chromatography operates reliably between room temperature +15 °C and 399 °C. Microprocessor-based control circuit with large memory ensures reliable and secure data storage. Automa...
Digital Hay Moisture Meter LHMM-T2013
The Hay Moisture Meter is used for measuring the moisture levels in hay stacks for better preservation and prevention of damage due to rotting. It has a digital display. Its operating co...
Grain Moisture Meter LGMM-T2012
Grain Moisture Meter is a testing instrument that is designed to measure moisture in grains to reduce decay or damage to the grains. It utilizes the relationship between moisture content...
Flame Photometer LFP-T2022
Flame Photometer supports 2-detection channels for simultaneous analysis of potassium (K) and sodium (Na), enabling dual‑ion testing within a single run. It includes flame-out-protectio...
Standards
Complies with the above standards, but is not limited to them.
Features
1. General category covering spectrometers, chromatographs, balances, titrators and other quantitative analytical instruments.
2. Supports elemental, molecular, physical and chemical property measurement across R&D and quality control laboratories.
3. Available in benchtop and portable configurations with software for data acquisition and regulatory compliance.
4. Equipment supports method development, routine testing and failure analysis in chemical, pharmaceutical and material industries.
5. Supplier provides application support, calibration services and user training for complex analytical systems.
FAQ
Q1: What testing scenarios is this instrument mainly applied to?
A: Analytical equipment serves quantitative and qualitative measurement in chemical, pharmaceutical, food, environmental and material laboratories. It supports raw material inspection, in-process control, finished product release testing, method validation and research applications where accurate and traceable measurement results are required for decision-making and regulatory reporting.
Q2: What standards does the instrument comply with?
A: Specific instruments comply with relevant ISO, ASTM, IEC and GB/T standards for their measurement principle, plus IEC 61010 for laboratory electrical safety and 21 CFR Part 11 for electronic records where applicable. Users should confirm the specific standard set for each instrument model before use in regulated testing.
Q3: What is the warranty period for the whole machine and key components?
A: Standard warranty is 12 months from delivery or commissioning. Optical, detector and control components are covered, while lamps, columns, reagents and consumables are excluded. Damage from unauthorized service or improper sample introduction is also excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Complex systems such as chromatographs and spectrometers require trained operators and method-specific training. We provide operation manuals, application notes and structured training for advanced instruments. Basic instruments such as balances and pH meters can be operated by general laboratory staff with brief instruction.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Calibration frequency depends on instrument type and regulatory requirements, typically every 6-12 months for accredited laboratories. Routine verification with reference standards before each analytical batch is recommended to ensure data validity and support audit trails.
Q7: Are supporting consumables universal? What about the long-term procurement cost?
A: Consumables vary by instrument and include lamps, columns, reagents, standards and filters. Some are original-proprietary while others are market-available. Long-term consumable cost should be evaluated per instrument and included in the annual laboratory budget.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes detector configuration, autosampler capacity, software modules and accessory packages. Custom orders extend lead-time and cost. Users should specify application requirements early to ensure the configuration matches intended methods.
Q9: Does the purchase include on-site installation and commissioning service?
A: Advanced analytical systems normally include installation and commissioning by a service engineer. Basic instruments may include only remote guidance. The service scope should be confirmed in the quotation and contract for each instrument.
Q10: What types of samples are compatible with this equipment?
A: Compatibility depends on the specific instrument and measurement principle. Users should verify sample matrix, concentration range, required pretreatment and instrument limitations before analysis. Corrosive, abrasive or high-particulate samples may damage components and require special handling.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.