Ion Chromatography System LICS-T2024

Introduction

Ion Chromatography System operates at a maximum pressure of 42 MPa (6000 psi) ensuring stable high-performance ion separation. Integrated single-chassis construction minimizes dead volume while optimizing internal fluid pathways. Full flow architecture supports wide pH compatibility with strong resistance to chemical corrosion. Built-in eluent generation and online vacuum degassing maintain consistent flow and signal stability. Designed to deliver precise analytical performance through intelligent automation and compact engineering.

This analytical equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Ion Chromatography System is used for simultaneous anion and cation analysis in environmental laboratories, pharmaceutical quality control, food and beverage testing, chemical research facilities, and academic or industrial analytical laboratories requiring high-precision ionic analysis.

Specifications

Maximum pressure	42 MPa / 6000 Psi
Flow range	0.001 to 10.000 mL/min
Flow accuracy	≤0.1%
Flow repeatability	≤0.01%
Pressure fluctuation	≤0.5%
Flow increment	≤0.001 mL/min
Materials	quartz plunger, high-pressure seals, pump head; acid/alkali/organic solvent resistant and durable.
Over pressure protection	automatic alarm and shutdown when pressure exceeds preset limit.
Electrically Controlled Autosampling Valve head material
Lifetime	≥100,000 switching cycles
Anion Column	High-capacity anion separation column capable of analyzing F⁻, Cl⁻, Br⁻, NO₂⁻, NO₃⁻, SO₄²⁻, PO₄³⁻, ClO₂⁻, ClO₃⁻, BrO₃⁻, dichloroacetic acid, trichloroacetic acid, formate, acetate, oxalate, etc.
Cation Column	High-capacity cation separation column capable of analyzing Li⁺, Na⁺, K⁺, NH₄⁺, Ca²⁺, Mg²⁺, methylamine, dimethylamine, trimethylamine, etc.
Maximum pressure of Anion and Cation Column	≥3000 psi
Flow rate of Anion and Cation Column	≥2.0 mL/min
Suppressor	Factory-produced electrolytic continuously regenerated suppressor, no external regenerant or pumps required.
Suppression capacity	≥100 μeq/min
Dead volume	≤50 μL
Conductivity Detector	high-sensitivity, large-capacity bipolar conductivity detector with wider detection range
Temperature compensation of Conductivity Detector	ambient +5°C to 80°C
Max pressure tolerance of Conductivity Detector	≥8 MPa
Temperature control accuracy of Conductivity Detector	±0.1°C
Baseline noise of Conductivity Detector	≤0.5% FS
Baseline drift of Conductivity Detector	≤10.0% FS / 30 min
Minimum detection limit of Conductivity Detector	Cl⁻ ≤0.0005 μg/mL; Li⁺ ≤0.0005 μg/mL
Qualitative repeatability of Conductivity Detector	≤0.5%
Quantitative repeatability of Conductivity Detector	≤1%
Temperature Control System	Dual-isolation, internal circulation, high-precision temperature control system with independent column oven and shared oven for detector and suppressor, ensuring high stability.
Power consumption	1200 W
Power supply	220 V 50 Hz
Dimension (W × D × H)	518 × 422 × 768 mm
Packaging dimension (W × D × H)	600 × 500 × 800 mm
Net weight	52 kg
Gross weight	62 kg

Features

Leak alarm protection

One-click operation

Automatic pump rinsing

Timed shutdown control

Dual-channel acquisition

FAQs

1. What are the key factors to consider when selecting this analytical equipment for laboratory use?

When selecting this analytical equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this analytical equipment be calibrated to ensure accurate results?

It is recommended to calibrate this analytical equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this analytical equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this analytical equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this analytical equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the analytical equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.