Plasma Autoclave LPA-T2012

Introduction

Plasma Autoclave has a capacity of 190 litres and offers sterilization at temperatures below 55°C. It takes 60 minutes for sterilization of hollow or tubular instruments requiring deep sterilant penetration. The autoclave uses a for automated control and consistent performance. Its 7-inch touch screen offers a user-friendly interface to monitor all operational parameters. Our autoclave is intended for large hospitals, and central sterile supply departments.

It uses high-temperature and high-pressure steam to achieve effective sterilization of laboratory equipment, media, and waste. The advanced control system ensures thorough sterilization while preventing overheating or pressure buildup.

Applications

Our Plasma Autoclave is ideal for use in large hospitals and central sterile supply departments. It is ideal for high-volume sterilization of complex and mixed medical instruments.

Specifications

Chamber Volume	190 L
Sterilization Temperature	Below 55℃
Sterilizing Agent	Hydrogen Peroxide
Sterilizing Time	Lumen cycle: 60 minutes
Controller	control
Display	7-inch color touch screen
Printer	Yes
Chamber Material	5052 Aluminium
Power	4300 W
Power Supply	AC 220 ± 22 V, 50 ± 1 Hz
Chamber Dimension (L×W×H)	820 × 510 × 460 mm
Overall Dimension (L×W×H)	1067 × 790 × 1782 mm
Weight	263 kg

Features

Automatic lift door

Built-in thermal printer

Corrosion-resistant chamber

Safety alarms

Wheels for mobility

Memory card for data storage

FAQs

1. What is the recommended sterilization cycle for different types of laboratory materials?

The recommended cycle depends on the material type: 1) For glassware and heat-resistant materials: 121°C, 15-20 psi, for 15-20 minutes; 2) For liquid media: 121°C, 15-20 psi, for 20-30 minutes (longer for larger volumes); 3) For wrapped instruments: 121°C, 15-20 psi, for 25-30 minutes to ensure steam penetration; 4) For waste materials: 132°C, 30 psi, for 30 minutes for biohazardous waste; 5) For heat-sensitive materials: Use a lower temperature (115°C) for a longer duration (30 minutes) or a specialized cycle if available. Always refer to the material manufacturer's recommendations.

2. How to properly load the autoclave to ensure effective sterilization?

Proper loading is crucial: 1) Place items in a way that allows steam to circulate freely around all surfaces; 2) Avoid overloading the autoclave chamber, leaving at least 2-3 inches of space between items; 3) Stack items with openings facing downward to prevent water accumulation and ensure steam penetration; 4) Use autoclave-compatible containers and avoid sealing them tightly (leave lids loose or use vented caps); 5) Separate different types of materials if possible, especially liquids and solids; 6) Ensure that liquid containers are not filled more than 2/3 full to prevent boiling over.

3. What maintenance procedures are required for the autoclave?

Regular maintenance includes: 1) Draining and cleaning the water reservoir after each use to prevent mineral buildup; 2) Descaling the autoclave monthly (or more frequently in hard water areas) using a recommended descaling agent; 3) Inspecting the door gasket for wear, cracks, or damage and replacing it if necessary; 4) Checking the pressure relief valve and safety interlocks quarterly to ensure proper operation; 5) Cleaning the chamber interior with a mild detergent after each use; 6) Performing annual calibration of temperature and pressure gauges by qualified personnel; 7) Keeping a maintenance log to track all service activities.

4. How to troubleshoot if the autoclave fails to reach the desired temperature or pressure?

If temperature/pressure issues occur: 1) Check if the water level in the reservoir is sufficient; 2) Verify that the door is properly closed and sealed (check gasket for damage); 3) Inspect the heating element for signs of malfunction; 4) Check the pressure relief valve to ensure it is not stuck open; 5) Clean the steam vents and drains to remove any blockages; 6) Ensure the autoclave is properly grounded and the power supply is stable; 7) If the problem persists, do not use the autoclave and contact technical support immediately, as it may pose a safety risk.

5. What safety precautions should be followed when operating the autoclave?

Important safety precautions: 1) Never open the autoclave door while it is pressurized or during the sterilization cycle; 2) Allow the autoclave to cool down and depressurize completely before opening; 3) Wear heat-resistant gloves and eye protection when handling hot items; 4) Stand to the side of the autoclave when opening the door to avoid steam burns; 5) Never autoclave incompatible materials (such as volatile solvents, oils, or explosives); 6) Regularly test the autoclave's performance using biological indicators (spore tests) to ensure effective sterilization; 7) Familiarize yourself with the emergency stop procedures and location of safety devices.

1. Why is low-temperature sterilization important?

Low-temperature sterilization is essential for preserving the integrity of heat-sensitive medical devices like endoscopes, probes, and sensors. Traditional high-temperature steam methods can damage these instruments. Plasma Autoclave operates below 55°C, allowing safe sterilization without affecting the functionality or material properties of sensitive equipment.

2. What materials are used in the chamber, and why?

The chamber is made of 5052-grade aluminum, a high-quality alloy known for its strength, durability, and corrosion resistance. This material is well-suited for use with hydrogen peroxide gas, ensuring long-term reliability while maintaining a sterile environment with minimal risk of degradation or contamination.

3. What are the benefits of the chamber’s rectangular design?

The rectangular chamber design provides a more spacious and practical loading area compared to round chambers. It allows users to load a broader variety of instrument trays and kits more efficiently. Additionally, its flat surfaces make cleaning and disinfection much easier, ensuring better hygiene between cycles.

4. Is it easy to move the autoclave around a facility?

Yes, the Plasma Autoclave is equipped with wheels for mobility, making it easy to relocate within medical, dental, or outpatient clinics. This is especially useful in settings where space is limited or where equipment needs to be shared between multiple departments or rooms.