Analytical Balance LINB-T2013

Introduction

Analytical Balance weighing range of 220 g delivers precise and stable measurements. It features robust sensor technology that ensures high-accuracy performance. The portable balance system allows for easy transport. Its adjustable sensitivity levels provide customization based on specific weighing needs. Our analytical balance secures data transmission that safeguards your results.

This laboratory balances is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Analytical Balance is a high-precision lab instrument designed to measure minute masses with accuracy. It is crucial in research, pharmaceuticals, conducting quantitative analysis, and quality control for precise chemical solutions and formulations.

Specifications

Capacity	220 g
Readability	0.1 mg
Stabilization Time	≤4 s
Calibration	External
Pan Dimensions	Φ 85 mm
Dimensions	360 × 220 × 350 mm
Packing Dimensions (L × W × H)	520 × 380 × 500 mm
Gross Weight	8 kg
Net Weight	10 kg

Features

Automatic Internal Calibration

Precision Engineering Design

Wide Display Angle

High Load Capacity

Minimal Drift Technology

FAQs

1. What are the key factors to consider when selecting this laboratory balances for laboratory use?

When selecting this laboratory balances, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this laboratory balances be calibrated to ensure accurate results?

It is recommended to calibrate this laboratory balances at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this laboratory balances?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this laboratory balances be used with different types of samples, and are there any compatibility considerations?

Yes, this laboratory balances can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the laboratory balances malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.

1. How does it support compliance with regulatory standards like , , and ?

It analytical balances are specifically designed to meet strict regulatory standards such as (Good Laboratory Practice), (Good Manufacturing Practice), and various guidelines. Each balance is equipped with features like automatic internal calibration, audit trails, password-protected access, and complete data recording to maintain traceable records. It models often feature built-in / compliant reports that can be printed or exported, including information such as time, date, operator ID, and balance ID. This minimizes the risk of human error and ensures documentation integrity. For laboratories undergoing regular audits or certifications, It provides certification of calibration, IQ/OQ/PQ documentation, and full traceability of service records. Their equipment also supports 21 Part 11 requirements for electronic data security when integrated into a controlled lab environment, ensuring complete regulatory readiness and easing the compliance burden for users.

2. What types of calibration are available with analytical balances?

It offers multiple calibration options to suit different laboratory needs. models are equipped with internal motorized calibration, where the balance automatically calibrates itself at preset time intervals or when environmental conditions shift. This guarantees consistent precision without user intervention. For laboratories that require manual verification, It balances also support external calibration using certified calibration weights. Some high-end models combine both systems, allowing dual calibration for even higher accuracy. Additionally, It provides calibration reminders, -recorded calibration histories, and real-time adjustment during weighing. This ensures that users always operate within certified tolerance limits. For critical applications such as pharmaceutical compounding, clinical research, and precision manufacturing, the robust calibration options provided by It significantly enhance reliability and data integrity.

3. How does support sample integrity during weighing processes?

Maintaining sample integrity is crucial in precision weighing, and It analytical balances offer multiple innovations to achieve this. The high-speed stabilization technology allows measurements to be completed quickly, minimizing the time the sample is exposed to environmental factors like humidity, temperature shifts, or static. touchless sensors enable operations such as taring or printing without physically touching the balance, reducing the risk of sample contamination. In addition, the draft shield designs used by It are often hermetically sealed and easy to clean, providing a clean microenvironment around the weighing pan. Some models even include -filtered air systems to ensure that particulates and microbes are minimized inside the weighing chamber. These features are especially vital for pharmaceutical, biotechnology, and forensic laboratories where sample purity cannot be compromised.

4. What user interface options are provided by analytical balances for enhanced usability?

It analytical balances feature high-resolution color touchscreens that are intuitive and customizable. The user interface often includes multi-language support, graphical workflows, and customizable shortcut keys for frequent functions, enhancing efficiency in multi-user environments. Advanced models display real-time graphs, calibration status, and even environmental monitoring readings on the home screen. software enables step-by-step guidance for complex weighing applications like formulation or density determination, reducing user errors. Sensitive touch sensitivity settings can be adjusted for use with gloved hands, critical in clinical and cleanroom settings. Some It balances even offer guided on-screen tutorials and self-diagnostic tools to assist new users in setup and troubleshooting. All of these features contribute to an easy, pleasant, and highly efficient weighing experience, no matter the technical skill level of the operator.