Dual-Range Temperature Thermostat LDRT-T2014

Introduction

Dual-Range Temperature Thermostat features sink front opening of 310 mm² × 280 mm² for efficient thermal regulation. Its advanced filtration system ensures sample fluid remains clean throughout testing to avoid contamination. Include adjustable circulation pump speed to cater to different fluid volumes and temperature needs. Equipped with easy-to-read digital interface that adjust and monitor settings with minimal effort. Supports high-volume testing, maintaining thermal stability even when used for prolonged periods.

This baths and circulators is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Dual Range Temperature Thermostat is perfect for thermal regulation in research, pharmaceutical testing, and clinical diagnostics, ensuring precise control over temperature-sensitive experiments and consistent, reliable results.

Specifications

Volume	30L
Temperature Range	-20℃ to 200℃
Temperature Fluctuation	±0.05℃
Circulating Pump	13L/min
Sink Front Opening	310 mm² × 280 mm²
Power Consumption	3400W
Dimension (L×W×H)	440mm × 300mm × 210mm

Features

Dual-set point temperature flexibility

Weather-resistant outdoor sensor compatibility

Easy installation and setup

Energy usage reports available

Over-the-air software updates

FAQs

1. What are the key factors to consider when selecting this baths and circulators for laboratory use?

When selecting this baths and circulators, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this baths and circulators be calibrated to ensure accurate results?

It is recommended to calibrate this baths and circulators at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this baths and circulators?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this baths and circulators be used with different types of samples, and are there any compatibility considerations?

Yes, this baths and circulators can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the baths and circulators malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.