Introduction
Constant Temperature and Humidity Incubator is a stainless steel chamber formulated to produce exact simulation of varying climatic conditions. The instrument comes with a user-friendly digital LCD interface for easy operation of parameters. It is equipped with micro-computer control system which ensures synchronized regulation of temperature and humidity. The temperature limiting / over temperature alarm system ascertains the equipment safety. It is highly suitable for checking stability and shelf life of the products in pharmaceutical, electronic, automobile and packaging industry and so on.
Constant Temperature And Humidity Incubator T-TH-F100
Constant Temperature And Humidity Incubator T-TH-E104
Constant Temperature And Humidity Incubator T-TH-E103
Constant Temperature And Humidity Incubator T-TH-E102
Constant Temperature And Humidity Incubator T-TH-E101
Constant Temperature And Humidity Incubator T-TH-E100
Constant Temperature and Humidity Incubator T-TH-D405
Constant Temperature and Humidity Incubator T-TH-D404
Constant Temperature and Humidity Incubator T-TH-D403
Constant Temperature and Humidity Incubator T-TH-D402
Constant Temperature and Humidity Incubator T-TH-D401
Constant Temperature and Humidity Incubator T-TH-D400
Constant Temperature and Humidity Incubator T-TH-D305
Constant Temperature and Humidity Incubator T-TH-D306
Constant Temperature and Humidity Incubator T-TH-D304
Constant Temperature and Humidity Incubator T-TH-D303
Constant Temperature and Humidity Incubator T-TH-D302
Constant Temperature and Humidity Incubator T-TH-D301
Constant Temperature and Humidity Incubator T-TH-D300
Constant Temperature and Humidity Incubator T-TH-D203
Constant Temperature and Humidity Incubator T-TH-D202
Constant Temperature and Humidity Incubator T-TH-D201
Constant Temperature and Humidity Incubator T-TH-D200
Constant Temperature and Humidity Incubator T-TH-D104
Constant Temperature and Humidity Incubator T-TH-D103
Constant Temperature and Humidity Incubator T-TH-D102
Constant Temperature and Humidity Incubator T-TH-D101
Constant Temperature and Humidity Incubator T-TH-D100
Constant Temperature and Humidity Incubator T-TH-L2104
Constant Temperature And Humidity Incubator T-TH-L2103
Constant Temperature And Humidity Incubator T-TH-L2102
Constant Temperature And Humidity Incubator T-TH-L2101
Constant Temperature And Humidity Incubator T-TH-L2100
Constant Temperature and Humidity Incubator T-TH-C306
Constant Temperature and Humidity Incubator T-TH-C305
Constant Temperature and Humidity Incubator T-TH-C304
Constant Temperature and Humidity Incubator T-TH-C303
Constant Temperature and Humidity Incubator T-TH-C302
Constant Temperature and Humidity Incubator T-TH-C301
Constant Temperature and Humidity Incubator T-TH-C300
Constant Temperature and Humidity Incubator T-TH-C206
Constant Temperature and Humidity Incubator T-TH-C204
Constant Temperature and Humidity Incubator T-TH-C205
Constant Temperature and Humidity Incubator T-TH-C203
Constant Temperature And Humidity Incubator T-TH-C202
Constant Temperature And Humidity Incubator T-TH-C201
Constant Temperature And Humidity Incubator T-TH-C200
Constant Temperature and Humidity Incubator T-TH-C104
Constant Temperature and Humidity Incubator T-TH-C103
Constant Temperature and Humidity Incubator T-TH-C102
Standards
ISO 11133:2014-Microbiology of food, animal feed and water-Preparation, production, storage and performance testing of culture media
Complies with the above standards, but is not limited to them.
Features
1. Timer and continuous-run options suit different protocols.
2. Natural or forced convection delivers uniform chamber temperature.
3. Precise temperature control with a digital display and clear setpoint.
4. Good insulation and door gasket reduce heat loss.
5. Smooth stainless chamber with rounded corners is easy to clean.
FAQ
What are the main applications of the Constant Temperature and Humidity Incubator?
The Constant Temperature and Humidity Incubator is used to maintain samples at a stable, controlled temperature for incubation, culturing, warming and general biological work. It is widely used in microbiology, clinical, food, pharmaceutical and research laboratories.
Which standards and regulations apply to the Constant Temperature and Humidity Incubator?
The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for laboratory incubators. Test and culture procedures should follow the applicable standard methods. Compliance documentation can be provided on request.
What warranty comes with the Constant Temperature and Humidity Incubator?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Will staff need special training?
No advanced specialist skills are needed for standard operation, though correct sample handling and safety practice should be followed. We supply a detailed manual and start-up support. For multi-user or regulated sites, a short staff training session can be arranged.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Is calibration included?
Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.
Where do we get replacement parts?
Filters, seals, probes and similar items are standard and can be supplied through our channel. Customers may also source equivalent items that meet the specification. Provide the model and serial number to confirm compatibility before ordering.
Can it be adapted to our requirements?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
Is installation and commissioning included?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What maintenance and safety points matter?
Flammable, volatile or corrosive materials should not be placed in a standard incubator, and pathogenic agents require containment. Avoid overloading and clean spills promptly. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.