Mullen Burst Tester LMBT-T2011

Introduction

Mullen Burst Tester offers a measuring range of 250 to 5600 kPa with an indicating accuracy of ±0.5%. It is equipped with advanced a noiseless thermal printer that eliminates the need for ink. The tester supports automatic measurement, statistical analysis, and printing for seamless data management. Its one-click test operation ensures ease of use and efficiency in testing processes. Our burst tester is a reliable choice for accurate and efficient paper testing. This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Mullen Burst Tester is used to measure burst strength of corrugated cardboard, cardboard boxes, paper trays, and non-paper materials such as foil, film, rubber, silk, cotton, etc.

Specifications

Measuring Range	250 to 5600 kPa
Indicating Accuracy	± 0.5%
Working Environment	10 to 35℃, Humidity ≤ 85%
Resolution	1 kPa
Compression Rate	170 ±15 ml/min
Required Compressed Air	0.6 to 0.7 MPa
Air Pressure Regulating	0.4 MPa
Sealing Property of Hydraulic System	Upper limit: 1 min, Pressure drop < 10% Pmax
Sampler Up loop Diameter	31.5 ±0.05 mm
Sampler Down loop Diameter	31.5 ±0.05 mm
Power Supply	AC 220V ±10% 50Hz 100W
Dimension (L × W × H)	460 × 320 × 580 mm
Net Weight	56 kg

Features

Automatic clamping (requires air supply)

32-bit processor technology

5-inch colour touchscreen display

Real-time pressure curve display

Over-range reset for sensor protection

Supports kPa, kgf/cm², Psi units

FAQs

1. What are the key factors to consider when selecting this test equipment for laboratory use?

When selecting this test equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this test equipment be calibrated to ensure accurate results?

It is recommended to calibrate this test equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this test equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this test equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this test equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the test equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.