ELISA Analyzer LELISA-T2010

Introduction

Analyzer is an automated unit consisting of a single sampling channel with a capacity ranging from 10µl to 1000µl. It features 8 independent photometric channels with both mono and dichromatic reading capabilities. It covers a broad absorbance range of 0 to 4 units for a wide range of sample concentrations. Equipped with 2 shaking incubators that operate within temperatures from RT to 60℃. Our analyzer is integrated with dual-thread control for simultaneous operation increasing efficiency and assay throughput.

This analytical equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Clinical Diagnostics: Diagnosing various diseases and conditions by detecting specific antibodies or antigens in patient samples.
Biomedical Research: Facilitates the study of protein-protein interactions, biomarker discovery, and drug development.
Quality Control: Ensuring the consistency and safety of products by detecting contaminants

Specifications

Sampling Channel	1 channel
Sample Racks	6 × 20 push-pull sample rack
Liquid Level Detection	Air pressure detection and clot detection
	1000µl, 2 racks
Pipetting	10µl to 1000µl
Pipetting Precision	100µl: CV ≤ 1%, Accuracy ≤ 2.5% 1000µl: CV ≤ 0.5 %, Accuracy ≤ 1 %
Reagent Position	2 Reagent racks
Dilution plate Position	1 Dilution plate Position with incubation and shaking
Washer	1 unit
Washing Head	16-channel (32-pin), double row cleaning, hanging installation, with leakage
Injection Uniformity	CV<1.5%
Washing Residual	< 2µl
Reading Channels	8 independent photometric channels mono and dichromatic reading
Absorbance Range	0 to 4 Abs
Linear Range	0 to 3 Abs
Repeatability	CV≤1%
Stability	≤±0.003Abs
Spectral Range	400 to700nm
Optical Filters	4 standard filters (405, 450, 492,630 nm) Total of 10 filters position
Reading Accuracy	≤±0.02Abs from 0 to 1 OD ≤±0.03Abs from 1 to 2 OD
Sensitivity	≥ 0.01mg/L
Channel Difference	≤ 0.02Abs
Incubators	2 shaking incubators
Cover Position	1 (2 covers)
Heating Method	Dry heating with cover
Shaking Function	Horizontal circular oscillation, 1 to 3 levels adjustable, amplitude 2.5mm
Temperature Range	RT to 60℃
Temperature Uniformity	± 0.5℃
Temperature Fluctuation	± 0.5℃
Software	Above Windows 7 system
System	Bi-direction, support HL7 protocol
Results	Absorbance and results viewed by software
Disinfection	UV lamp
Lighting
function	Firmware can be upgraded online at any time
Temperature	10 to 40 ℃
Humidity	30 to 80 %
Power	AC220V±10%,50/60Hz(Standard) 110V±10%, 50/60 Hz (Optional)
Dimension (W× D ×H)	870 × 700 × 885mm
Packing Dimension (W× D ×H)	1018 × 828 × 1130 mm
Net Weight	160kg
Gross Weight	180kg

Features

Offers and clot detection

High precision pipetting

Position sensing system

Multi-spacing and adjustable grippers

Built-in microplate reader

Incorporated with alarm functions

FAQs

1. What are the key factors to consider when selecting this analytical equipment for laboratory use?

When selecting this analytical equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this analytical equipment be calibrated to ensure accurate results?

It is recommended to calibrate this analytical equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this analytical equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this analytical equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this analytical equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the analytical equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.