Analytical Balance LINB-T2012

Introduction

Analytical Balance can weigh for up to 120 g with a resolution of 0.0001 g. Its display offers precise and accurate readings for weighing applications. Also, it features a draft shield to protect the measurement from disturbances. The multiple unit conversion enhances user convenience by allowing readings in four units: g, mg, ct, and oz. Our balance is used in research laboratories and pharmaceutical industries for precise weighing applications.

This laboratory balances is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Analytical Balance is used for high-precision weighing in pharmaceuticals, research, chemical analysis, and quality control. It ensures accurate measurement of minute quantities in laboratories, and food testing industries.

Specifications

Capacity	120 g
Minimum Weighing	0.0004 g
Resolution	0.0001 g
Pan Size	Փ 80 mm
Stable Time	Up to 3 s
Display	( White back light with black font )
Repeatability	± 0.0002 g
Linearity	± 0.0003 g
Calibration Weight	Internally calibrated

Features

Overload alarm

Fault alarm

Keys operation mode

Counting and percentage

User-friendly operation

FAQs

1. How does an analytical balance differ from a precision balance?

An analytical balance has higher sensitivity and can measure very small weights accurately, typically down to 0.1 mg. In contrast, a precision balance usually has a lower readability such as 0.01 g or 0.001 g and is used when such extreme precision is not required. Analytical Balance has a resolution of 0.0001 g.

2. Why is a draft shield necessary in an analytical balance?

A draft shield protects the weighing pan from air currents and dust, which can cause fluctuations in readings. Since analytical balances are extremely sensitive, even small disturbances can lead to inaccurate measurements. Analytical Balance comes with a draft shield for accurate readings.

3. What is internal calibration in an analytical balance and why is it useful?

Internal calibration is a feature of our Analytical Balance with which it automatically calibrates itself using a built-in reference weight. This function ensures consistent accuracy without the need for external weights and is especially useful in environments where frequent calibration is required due to changes in temperature or usage conditions.

4. What is the tare function and how is it used?

The tare function allows the user to zero the balance after placing a container on the pan, so only the net weight of the sample inside the container is measured. This is useful in virtually all weighing tasks to avoid including the weight of containers in the result. Tare function helps in getting a precise result for sample.

5. What precautions should be taken when using an analytical balance?

Always use gloves or tweezers to handle samples to avoid contamination, ensure the balance is level, avoid placing items directly on the pan, and close the draft shield during weighing to maintain stability. Always shut the balance off when not in use and use tare function for precise reading.