Ozone Test Chamber LOC-T2013

Introduction

Ozone Test Chamber equipped with a 700 mm diameter holder with a 350 mm side length, provides accurate ozone concentration measurement. It has a built-in safety voltage protection module. The chamber also features a low-noise ozone generator and a closed-type compressor unit. Its advanced UV detector ensures precise ozone concentration testing. Our chamber ensures stable performance with minimal maintenance needs.

This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Ozone Test Chamber  is widely used for testing the ozone resistance of materials such as rubber, plastics, and textiles. It is also employed in environmental testing, material degradation studies, and ozone concentration calibration.

Specifications

Diameter of Holder (mm)	700
Length of Each Side (mm)	350
Temperature Range	0℃ to 100℃
Humidity Range	30 % to 98 % R.H
Temperature Fluctuation	± 0.5 ℃
Speed Rate for Cooling	Ambient ~ 0 ℃ within 20 min
Timing Range	0 to 999 hours
Ozone Concentration	1 to 1000PPHM
Sample Holder Rotation Speed	0 to 10 r/min (adjustable)
Clamps Tensile Stretch	5 % to 35 %
Max. Ozone Concentration	120 g O3/m³
Ozone Output	3.5 g O3/h (oxygen input, flow rate 100L/h)
Nominal Power	9000 W
Internal Dimensions	800 × 1000 × 1000 mm
Overall Dimensions (mm)	1280 × 1550 × 2110 mm
Power Supply	AC 380 V 50Hz

Features

programmable controller

Static and dynamic sample holder

touchscreen display

Advanced control system

Wide operating range for temperature

Stainless steel structure

High cooling efficiency

FAQs

1. What are the key factors to consider when selecting this test equipment for laboratory use?

When selecting this test equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this test equipment be calibrated to ensure accurate results?

It is recommended to calibrate this test equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this test equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this test equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this test equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the test equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.