Ozone Test Chamber LOC-T2011

Introduction

Ozone Test Chamber has a 250 L capacity, and a temperature control range from 0 °C to 100 °C. It features a high-accuracy PT100 temperature sensor and a silent-discharge ozone generator for precise environmental conditions. Our chamber includes centrifugal fan circulation and an electromagnetic door lock to ensure safety and efficiency. It also has an external stainless-steel humidifier for easy monitoring and reliable operation.

This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Ozone Test Chamber is used for testing the ozone resistance of rubber, polymers, and other materials. It is ideal for industrial quality control, material aging analysis, and research applications.

Specifications

Internal Capacity	250 L
Temperature Range	0℃ to 100℃
Temperature Deviation	±2.0℃
Humidity Range	30% to 98% RH
Humidity Deviation	±2.5% RH
Cooling Rate	Ambient to 0℃ within 20 min
Cooling System	Mechanical compression refrigeration system
Ozone Concentration	1 to 1000
Gas Flow Rate	12 mm/s to 16 mm/s (not controlled/displayed)
Gas Sensor	Ozone gas sensor
Ozone Generator	Silent discharge type ozone generator
Air Circulation	Centrifugal wind fan
Clamps Tensile Stretch	5% to 35%
Compressor	French compressor
Refrigerant	R454C
Heating Element	Nichrome heater
Connectivity	Ethernet, PC link, port
Water Purification	Automatic water supply with purification system
Humidifier	External isolation, stainless steel surface evaporation humidifier
Dehumidification	Evaporator
Temperature Sensor	Platinum Resistance PT100Ω/-class, accuracy 0.001℃
Humidity Sensor	Dry and wet bulb sensor
Sample Holder	Rotate speed 20 mm/s to 25 mm/s
Exterior Material	Steel plate with protective coating
Interior Material	SUS304 stainless steel
Thermal Insulation	Polyurethane foam and insulation cotton
Safety Protection	Humidifier dry combustion; over-temperature, over-current, refrigerant high-pressure, water shortage, earth leakage protections
Power Supply	AC 380V, 50Hz, 3-phase
Internal Dimension	720× 800 × 1650 mm
Overall Dimension	1100 × 1140 × 1850 mm
Packing Dimension	1270 × 1270 × 2090 mm
Net Weight	220 kg
Gross Weight	250 kg

Features

programmable controller

Intuitive touch screen

Closed-type compressor unit

Low maintenance

Noiseless operation

FAQs

1. What are the key factors to consider when selecting this test equipment for laboratory use?

When selecting this test equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this test equipment be calibrated to ensure accurate results?

It is recommended to calibrate this test equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this test equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this test equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this test equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the test equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.