Plant Canopy Analyzer T-PCA-S2100

Introduction

Plant Canopy Analyzer offers 180° fish eye lens enables comprehensive imaging views. Equipped with an M12 interface ensuring stable mounting and distortion-free visual capture. Built-in three-axis accelerometer supporting automatic leveling adjustment for consistent field measurements. Integrated with a 0° to 360° geomagnetic sensor assisting in directional orientation in research. Plant Canopy Analyzer operates efficiently between 0 to 50°C temperature and up to 90% humidity.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Plant Canopy Analyzer aids in leaf area analysis, gap fraction study and illumination studies, while monitoring sunlight duration and solar path for agriculture, forestry, and ecological research.

Specifications

PAR Sensor Range	0 to 3000 μmol/m² s
PAR Sensor Resolution	1μmol/ m² s
Lens View Angle	180° fisheye
Lens Aperture And Focus	Fixed
Lens Interface	M12
Image Sensor Type	CMOS
Image Sensor Pixel	200w optical pixels
Image Sensor Single-Pixel Size	3.6×3.6μm
Tilt Sensor Type	Three-axis accelerometer
Tilt Sensor Accuracy	2°
Tilt Sensor Display	LED
Direction Sensor Type	Geomagnetic sensor
Direction Sensor Range	0 to 360°
Storage Capacity	32 GB SD card or PC
Data Interface	SD card or USB 2.0
Working Environment	0 to 50℃,0 to 90%RH
Power Supply	7.2 V, 1.0 Ah Li-ion rechargeable battery
Dimension	70 × 115 mm
Net Weight	400g
Repeatability	≤2% RSD

Features

High-Resolution CMOS

Photosynthetically Active Radiation (PAR) Detection

Dual Data Storage

Li-Ion Rechargeable Battery

LED Display

Durable And Lightweight 

Standard Accessories

FAQs

1. What is the main function of this Plant Canopy Analyzer?

It is a professional laboratory instrument designed for Plant Canopy Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Plant Canopy Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Plant Canopy Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Plant Canopy Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Plant Canopy Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.