Introduction
Plant Growth Test Chamber operates at a temperature range of 10℃ to 65℃ with illumination. It incorporates forced convection for efficient air circulation in the chamber and a rear micropore system for ventilation. This system can store data on a U-disk and export it for external analysis. Offers features like programmed start/off, deviation correction, menu key locking, power failure compensation, power failure memory, loop self-diagnosis, and intelligent defrosting.
Applications
The plant growth test chamber is utilized for cultivating microorganisms, cell tissues, seedlings, insects, and small animals by providing optimal conditions.
Specifications
| Volume | 450 L |
| Temperature Range | 0℃ to 65℃ (Without illumination) 10℃ to 65℃ (With illumination) |
| Temperature Resolution Ratio | 0.1℃ |
| Temperature Motion | ± 0.5℃ |
| Temperature Uniformity | ± 1.0℃ |
| Illumination (LX) | 0 to 30000 LX |
| Humidity Range | 40% to 95%RH |
| Humidity Motion | +5% RH |
| Inner Chamber | SUS304 stainless steel sheet |
| Outer Shell | Steel electrostatic spraying exterior |
| Insulation Material | Polyurethane |
| Light Barrier | Standard four-layer full spectrum LED lamp board |
| Heater | Stainless steel healing tube |
| Compressor | Air-cooled hermetic compressor |
| Coolant | R134A |
| Defrosting Structure | Automatic |
| Humidity Control Mode | Automatic |
| Leading Wire Hole Size | 10 mm |
| Temperature Control Mode | 30 sections program |
| Temperature Setting Mode | Touch screen settings |
| Operation Function | Fixed temperature operation Timing function Auto stop Appointment start Program operation |
| Program Pattern | Standard configuration |
| Sensor | PT100 Temperature Sensor, Imported chip humidity sensor |
| Load Per Rack | 15 kg |
| Shelf Space | 120 mm |
| Power Consumption | 2.5 kW |
| Power Supply | AC220/11.5A, 50/60hz |
| Internal Dimension (W × L × H) | 630 × 670 × 1100 mm |
| External Dimension (W × L × H) | 824 × 896 × 1860 mm |
| Packaging Dimension (W × L × H) | 823 × 1033 × 2110 mm |
| Net Weight | 310 Kg |
| Gross Weight | 350 Kg |
Features
Crafted with a double door featuring high-quality stalinite
Integrates high-quality temperature sensor and compressor
Incorporates a full-spectrum LED as its primary light source
Includes an internal humidification system and multi-stage adjustable controller
Furnished with a 7-inch touch screen for user-friendly operation
Provided with a removable light partition and adjustable layer space
Able to automatically regulate water intake through water supply control
Capable of retrieving historical temperature and humidity data curves
Equipped with backflow and expansion valves
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
