Microplate Sealer T-MSR-S2100

Introduction

Microplate Sealer offers adjustable sealing temperature of 80°C to 200°C. It reaches 170°C in just 300 seconds, ensuring rapid and efficient heating performance. It is built with automatic height sensing to optimize sealing for each plate without manual setup. It features high-contrast OLED display for clear, sharp, and easy-to-read results. Sealer supports workflows in PCR, ELISA, and culture analysis in clinical and molecular testing environments.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Microplate Sealer is suitable for ELISA, PCR, cell culture, and deep-well plates to prevent evaporation, minimize contamination, and enable long-term sample storage

Specifications

Sealing Type	Semi-automatic heat sealing
Temperature Range	80°C to 200°C
Temperature Accuracy	±1°C
Temperature Uniformity	Less than or equal to ±5°C
Sealing Time Range	0.5 to 10 seconds (0.1s step)
Seal plate Height	9 to 48 mm
Heating Speed	170°C in 300 seconds
Cooling Deviation	Less than or equal to 2°C during sealing
Compatible Plate material	PP(Polypropylene), PS(Polystyrene), PE(Polyethylene)
Compatible plate types	Standard Assay Plates, Deep-well Storage Plates, PCR Plates: skirted, semi-skirted, non-skirted
Compatible Sealing Film Types	Foil-polyproylene laminate, Clear polyester-polypropylene laminate, Clear polymer, Thin clear polymer
Power Consumption	300W
Power Supply	200 to 240V, 50/60Hz
Dimensions	178 × 370 × 330 mm
Weight	11.46 kg

Features

Temperature control 

Auto drawer reversal 

Detachable drawer 

Stand-by mode 

Power-save mode 

Quick reactivation

FAQs

1. What is the main function of this Microplate Sealer?

It is a professional laboratory instrument designed for Microplate Sealer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Microplate Sealer compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Microplate Sealer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Microplate Sealer?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Microplate Sealer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.