Introduction
An energy dispersive X-ray fluorescence (EDXRF) spectrometer is an analytical instrument used for the elemental analysis of the materials by the measurement of the characteristic X-rays emitted from the sample when it is excited by the X-rays, and it is used in the materials, the environmental, the geological, the industrial, and the many other applications. The EDXRF spectrometer irradiates the sample with the X-rays from an X-ray tube, and the atoms in the sample emit the characteristic X-rays, which are detected by an energy dispersive detector, such as a silicon drift detector (SDD), and the energies and the intensities of the characteristic X-rays identify and quantify the elements; the EDXRF spectrometer consists of an X-ray tube, the excitation optics, a sample chamber, a detector, and the electronics with the data analysis, and it provides a rapid and a multi-element analysis, with features such as the minimal sample preparation and the non-destructive measurement; the EDXRF spectrometer is used for the elemental analysis of the metals and the alloys, for the analysis of the soils and the sediments, for the analysis of the ores and the minerals, for the analysis of the coatings, for the screening of the hazardous elements, for the quality control, and for many other applications, and it is available as the benchtop and the portable instruments; the EDXRF spectrometer is an essential instrument for the elemental analysis. EDXRF spectrometers are used in the materials laboratories, in the environmental monitoring, in the geology, in the industry, and for many other applications. With their energy dispersive detection, EDXRF spectrometers are essential for the rapid elemental analysis.
Energy Dispersive X-Ray Fluorescence Spectrometer T-S210EDX
Energy Dispersive X-Ray Fluorescence Spectrometer is a high-speed digital processing analyzer offering an elemental analysis ranging from Fluorine (F) to Uranium (U). It comes with an ana...
Energy Dispersive X-Ray Fluorescence Spectrometer T-S220EDX
Energy Dispersive X-Ray Fluorescence Spectrometer is an advanced testing system for environment compliance testing. Within the range of 1 ppm to 99.99%, it features an elemental analysis ...
Standards
ASTM E1621-22-Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
Complies with the above standards, but is not limited to them.
Features
1. Energy-dispersive X-ray fluorescence spectrometer for elemental analysis of solid, liquid and powder samples.
2. Silicon drift detector provides high count rate and energy resolution for multi-element identification.
3. X-ray tube with multiple filter options optimizes excitation for light and heavy element analysis.
4. Software supports qualitative identification and quantitative measurement with fundamental parameter calibration.
5. Suitable for material analysis, alloy sorting, mining, environmental and quality control applications.
FAQ
Q1: What testing scenarios is this instrument mainly applied to?
A: The EDXRF spectrometer is used for elemental analysis in metallurgy, alloy verification, mining, cement, environmental monitoring, plastics and RoHS compliance testing. It supports raw material inspection, finished product composition verification, scrap metal sorting, hazardous element screening in electronics and soil contamination assessment. The non-destructive nature allows analysis of valuable or finished samples without sample destruction, and minimal sample preparation makes it suitable for high-volume quality control environments.
Q2: What standards does the instrument comply with?
A: The instrument supports analytical methods referenced in ISO 12677 for XRF analysis of refractory products, ASTM E1621 for elemental analysis by wavelength-dispersive X-ray fluorescence, IEC 61010 laboratory safety, and relevant GB/T standards for X-ray fluorescence analysis. Radiation safety complies with applicable local regulations for X-ray equipment.
Q3: What is the warranty period for the whole machine and key components?
A: The whole spectrometer is covered by a 12-month warranty. The X-ray tube, detector and control system are covered, while filters, sample cups and films are consumables excluded from warranty. Extended warranty and service contracts are available for this high-value system. Damage from unauthorized opening or radiation safety interlock bypass is excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires trained analysts familiar with XRF principles, sample preparation and calibration methods. We provide structured operator training, application support and method consultation. Routine use by trained operators is supported by software wizards and standard operating procedures. Radiation safety training is mandatory for all users.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Energy calibration and reference verification should be performed according to the manufacturer schedule, typically daily or before each analytical batch. Quantitative calibration with certified reference materials should be verified periodically, and full system calibration is recommended annually. Radiation leakage inspection is required by local regulations.
Q7: Are supporting consumables universal? What about the long-term procurement cost?
A: Sample cups, films and calibration standards are available from multiple qualified suppliers, though original standards are recommended for traceability. X-ray tube and detector have long service lives but are high-value replacement items. Long-term service and consumable cost should be included in the annual budget.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes detector type, X-ray tube power, filter configuration, sample chamber size and software modules. Custom orders require detailed application discussion and extend lead-time. Users should define target elements, concentration ranges and sample types before configuration.
Q9: Does the purchase include on-site installation and commissioning service?
A: Yes, EDXRF systems include on-site installation, commissioning and operator training by a certified application specialist. Radiation safety inspection and site preparation guidance are provided before delivery to ensure compliance with local regulations.
Q10: What types of samples are compatible with this equipment?
A: The spectrometer analyzes solids, liquids, powders and pastes within the element range and concentration limits. Samples must be homogeneous and properly prepared for quantitative results. Highly radioactive samples are not suitable. Light elements below sodium may require helium purge or vacuum configuration depending on the instrument setup.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.