GC Zero Air Generator T-ZAG-S2100

Introduction

GC Zero Air Generator delivers stable outlet flow rate of 6 L/min for continuous gas supply. Equipped with advanced purification technology to reduce HC content in outlet gas to less than 0.05 ppm. Incorporated with an efficient CO removal system, maintaining CO content below 0.05 ppm. It supports maximum output pressure of 6.5 bar and operates with low noise and compact design. Generator is ideal for GC-FID, NPD, and other sensitive GC applications.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

GC Zero Air Generator is employed to supply hydrocarbon-free air for GC detectors like FID and NPD. It ensures consistent baseline stability and reliable detection in analytical laboratories.

Specifications

Outlet Flowrate	8 L/min
HC Content in Outlet Gas	Less than 0.05 ppm
Exhaust CO Content	Less than 0.05 ppm
Maximum Allowable CO	50 ppm
Maximum Permissible HC in Intake Air	100 ppm
Minimum Inlet Air Temperature	40°C
Outlet Temperature	Room temperature +15°C
Allowable Inlet Pressure	4.5 to 6 bar
Maximum Output Pressure	6.5 bar
Pressure Drop	Less than 1 bar
Inlet Size	1/4-inch tube fitting
Outlet Size	1/4-inch or 1/8-inch tube fitting
Power Consumption	550 W
Power Supply	110 to 120V/60Hz; 220 to 240V/50Hz
Dimensions	410×150×230 mm
Weight	11 kg

Features

Safe and reliable

Compact design

Round-the-clock operation

FAQs

1. What is the main function of this Gc Zero Air Generator?

It is a professional laboratory instrument designed for Gc Zero Air Generator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Gc Zero Air Generator compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Gc Zero Air Generator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Gc Zero Air Generator?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Gc Zero Air Generator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.