Explosion-Proof Thermal Circulator T-ETR-S2115

Introduction

Explosion-Proof Thermal Circulator offers an extended working span of -80℃ to 200℃ for versatile performance. It features integrated precooling, heating, and refrigeration systems functioning simultaneously for better thermal balance. Equipped with high grade enclosed compressor, it delivers low noise and long-term operation. Incorporates protection against leakage, overheating, and overcurrent to ensure operational safety. Circulator ensures external heating and cooling.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Explosion-Proof Thermal Circulator enables reliable heating and cooling for reactors, fermentation tanks, and pilot production lines in biotech, pharmaceutical, and food industries.

Specifications

Working Temperature Range	-80 to 200℃
Volume	100 L
Flow Rate	42 L/min
Pressure	Less than or equal to 0.4 MPa
Pump Lift Range	25 m
Temperature Sensor	PT100
Refrigerant	R404
Ambient Temperature Range	5 to 35℃
Relative Humidity	Less than or equal to 70%
Temperature Control Accuracy	±0.1℃
External Input	External sensor port
Heating Power	9000W
Compressor Power	8832W
Cooling Power	26496W
Circulating Pump Power	370W
Power Consumption	18500W
Power Supply	380V/50Hz
Dimensions (W×D×H)	930×1530×1410 mm
Weight	306 Kg

Features

Smart control panel

Dual pressure gauges

Bath fluid access ports

Efficient airflow vent

Smooth rolling casters

Emergency stop button

Status indicator lights

FAQs

1. What is the main function of this Explosion Proof Thermal Circulator?

It is a professional laboratory instrument designed for Explosion Proof Thermal Circulator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Explosion Proof Thermal Circulator compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Explosion Proof Thermal Circulator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Explosion Proof Thermal Circulator?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Explosion Proof Thermal Circulator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.