Introduction
2-position laboratory hot plate is a versatile heating device designed for simultaneous heating of two separate samples or containers in a laboratory setting. It typically consists of a flat, heated surface with two designated areas where laboratory glassware or containers can be placed. Each position can be controlled independently, allowing for precise temperature regulation for different experiments or processes simultaneously. hot plates are commonly used in chemistry and biology laboratories for tasks such as heating solutions, evaporating solvents, or maintaining specific temperatures in experiments.
2 – Position hotplate T-S223THP
2 - Position hotplate is a ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C). Featu...
2 – Position hotplate T-S222THP
2 - Position hotplate is a ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C). Featu...
2 – Position Hotplate T-S220THP
2 - Position hotplate is a ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C). Featu...
2 – Position hotplate T-S221THP
2 - Position hotplate is a ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C). Featu...
Standards
IEC 61010-2-010:2020-Particular requirements for laboratory equipment for the heating of materials
Complies with the above standards, but is not limited to them.
Features
1. Support rod and clamp options hold probes and glassware.
2. Automatic shut-off and timer support safe operation.
3. Stirring models combine heating and magnetic agitation.
4. Low-profile design and non-slip feet keep the unit stable.
5. Even heating across the ceramic or metal surface.
FAQ
What are the main applications of the 2 position hot plate?
The 2 position hot plate is used to heat, warm or maintain samples and glassware at controlled temperatures. It supports routine chemistry, digestion, warming and sample preparation in teaching, research and quality-control laboratories.
Which standards and regulations apply to the 2 position hot plate?
The unit is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for laboratory heating equipment. Procedures should follow the applicable methods. Compliance documentation can be provided on request.
What does the warranty cover?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Is the 2 position hot plate difficult to operate?
Day-to-day use is simple, with clear prompts and pre-set functions reducing manual steps. New operators should review the manual and complete a short familiarisation. Our technical team offers remote support during the first runs.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the 2 position hot plate be calibrated?
The unit is calibrated and tested before delivery. For ongoing accuracy, verify it against traceable reference standards every 6 to 12 months, or according to the laboratory quality schedule. We can arrange calibration service and certificates where required.
Where do we get replacement parts?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Are options or configurations available?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Is installation and commissioning included?
Standard installation is straightforward and supported by the manual and start-up documentation. Our technical team can guide staff remotely through checks and validation. On-site commissioning is available as a quoted service.
What should be avoided when using the 2 position hot plate?
Do not heat flammable materials directly, exceed the surface rating or leave heating unattended. Use heat-resistant gloves and suitable glassware. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.