Automatic Reid Vapor Pressure Tester T-RVP-S2100

Introduction

Automatic Reid Vapor Pressure Tester accommodates 3 specimens for simultaneous testing. Built with fully automatic design, it offers consistent performance with minimal supervision. Features fixed 4:1 chamber volume ratio for reliable vapor pressure analysis. Incorporates rapid heating system to maintain 37.8°C water bath temperature. Automatic Reid Vapor Pressure Tester ensures efficient workflow through streamlined operation and compact structure.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Automatic Reid Vapor Pressure Tester is widely employed in vapour pressure determination of gasoline, volatile crude oil, and other volatile petroleum products.

Specifications

Water Bath Temperature	37.8°C
Pressure Gauge Range	0 to 0.16MPa
Mixing Angle	350°C
No of Samples	3 specimens
Upper and Lower Chamber Volume Ratio	4:1
Display	8-inch color TFT LCD touchscreen
Heating Power	1000W
Power Supply	AC220V±10% 50Hz
Power Consumption	1100W
Dimension	1183×1312×1280mm
Net Weight	95Kg
Gross Weight	120Kg

Features

Single-chip microcomputer control 

Color TFT LCD touchscreen

Store 100 results

Online pressure regulation

Online temperature adjustment function

Pressure calibration devices

Standardized under ASTM D323

Standard Accessories

FAQs

1. What is the main function of this Automatic Reid Vapor Pressure Tester?

It is a professional laboratory instrument designed for Automatic Reid Vapor Pressure Tester applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Automatic Reid Vapor Pressure Tester compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Automatic Reid Vapor Pressure Tester?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Automatic Reid Vapor Pressure Tester?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Automatic Reid Vapor Pressure Tester shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.