Introduction
A cyclic corrosion test chamber is a controlled-environment test chamber used to test the corrosion resistance of the materials and the coatings by the cyclic exposure to the corrosive conditions, such as the salt spray, the humidity, the dry, and the temperature cycles, and it is used in the automotive, the coating, the metals, and the many other industries. The cyclic corrosion test chamber consists of an insulated chamber, a salt solution reservoir and a spray system, a humidity control system, a heating and a cooling system, a temperature control system, and the racks for the specimens, and it performs the test cycles according to the standard test methods, such as the ASTM and the ISO standards, including the salt spray, the humidity, the dry, and the dwell periods, which simulate the corrosive environments and the corrosion mechanisms; the cyclic corrosion test chamber is used for the testing of the corrosion resistance of the automotive parts and the components, for the testing of the coatings and the platings, for the testing of the metals and the alloys, for the qualification and the acceptance testing, for the quality control, and for many other applications, and it provides a controlled and a reproducible test, with features such as the programmable cycles and the data logging; the cyclic corrosion test chamber is an essential equipment for the corrosion testing. Cyclic corrosion test chambers are used in the automotive industry, in the coating industry, in the metals industry, in the laboratories, and for many other applications. With their cyclic corrosion testing, cyclic corrosion test chambers are essential for the corrosion resistance evaluation.
Cyclic Corrosion Test Chamber LCTC-T2010
Cyclic Corrosion Test Chamber has a volume of 780 liters and offers a temperature range from +10°C to +90°C. It supports test methods such as neutral salt spray, acetic acid salt spray...
Standards
ISO 16701:2025-Corrosion of metals and alloys-Accelerated corrosion test under controlled humidity cycling and intermittent salt spraying
ISO 9227:2022-Corrosion tests in artificial atmospheres-Salt spray tests
ASTM B117-Standard Practice for Operating Salt Spray (Fog) Apparatus
Complies with the above standards, but is not limited to them.
Features
1. Cyclic corrosion test chamber for corrosion cycling.
2. Chamber running salt, humidity and drying cycles.
3. For automotive and coated products.
4. Includes chamber, spray, controls and manual.
5. Simulates cyclic corrosion conditions.
FAQ
Q1: What scenarios is this chamber used for?
A: It runs repeated salt spray, humidity and drying cycles to simulate corrosion for automotive parts and coated products.
Q2: What standards does it comply with?
A: It follows ISO 11997, ASTM G85/D1735 and related GB/T standards, with temperature and spray calibrated. We confirm the stated performance during final inspection and can supply a certificate of conformity together with supporting documents for audit purposes.
Q3: What is the warranty?
A: It carries a 12 to 24 month warranty covering the chamber and controls. Seals and nozzles are wear parts. Damage from misuse is excluded.
Q4: Is it hard to operate?
A: It requires trained staff for solution, cycles and maintenance. We provide a manual, installation and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: We recommend verification against traceable standards at regular intervals, typically every 6 to 12 months, and keeping calibration records for audit purposes. The manual describes the procedure, and reference standards are available from us. Accredited third-party calibration can also be arranged on request.
Q7: Are consumables universal?
A: Salt is standard, while nozzles and seals are model-specific. Ongoing cost includes salt and filters.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include size, cycle functions, racks and data logging. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: No installation is required for this unit. It is ready to run after a simple power connection and the leveling steps shown in the manual. We supply a detailed operation guide and online setup videos, and on-site commissioning can be arranged separately if your facility requires it.
Q10: What samples are compatible?
A: It handles metal and coated parts within chamber size. It is not for non-corrosion tests, incompatible chemicals, or specimens beyond the chamber.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.