Introduction
Nebulizer is a medical device that converts liquid medication into a aerosol that can be inhaled into the lungs. Equipped with medicine cup that can be sterilized at high temperature and is easy to fill. It offers relief to respiratory ailments and has simplified operation approach.
Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.
Applications
Nebulizer is commonly used in the treatment of respiratory conditions such as asthma and COPD.
Widely applied in academic research laboratories, quality control departments of manufacturing enterprises, and testing institutions. Suitable for sample preparation, analysis, and storage in fields such as life sciences, materials science, environmental monitoring, and food safety.
Specifications
| Cup capacity | 8 ml |
| Atomized particles | 3 µm ± 25 % |
| Atomization rate | ≥ 0.4 MI/min |
| Working Temperature range | 5 ℃ to 40 ℃ |
| Relative humidity | 15% to 93% |
| Atmospheric pressure range | 86 kPa to 106 kPa |
| Frequency | 113 kHz |
| Noise | ≤ 50 db |
| Operation mode | Continuous |
| Transportation and storage conditions | -40 ℃ to +55 ℃, 10% to 93%, 70 kPa to 106 kPa |
| Power | 0.65 W (5 V/130 mA） |
| Dimensions | 50 × 48 × 130 mm |
| Packaging dimensions | 140 × 110 × 56 mm |
| Weight | 110 g (without battery) |
Features
Detachable and fully waterproof medication cup with markings for proper dosage
Easy to clean and disinfect
Atomization with low voice
Atomizes small particles in large amount
Intelligent low-power mode
Self-cleaning property prevents water clogging
Small and portable device to use in case of emergency
User-friendly operation
FAQs
1. What is the main function of this Laboratory Instrument?
It is a professional laboratory instrument designed for Laboratory Instrument applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.
2. What are the key advantages of this Laboratory Instrument compared to similar products?
It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.
3. What regular maintenance is required for this Laboratory Instrument?
General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.
4. What are the installation requirements for this Laboratory Instrument?
Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.
5. What should I do if the Laboratory Instrument shows abnormal operation?
General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
