Introduction
Double vessel fermenter system is designed to conduct multiple operations in a small laboratory space. Built in touch screen control system. Double glass jacket (wall) vessel connected to external water bath act as a temperature control system. Fbuilt-in peristaltic pumps with programmable PID feeding control of acid, base, antifoam and feed. Top drive, single mechanical seal agitator aids direct coupling. Real time graphic trend, data checking and record for user interpretation.
Applications
Used for different culture experiment and application such as microbial cultures, cell cultures, batch, fed-batch, perfusion and continuous cultivation.
Specifications
| Total volume | 3 L |
| Working volume | 2.5 L |
| Vessel aspect ratio ( H : D ) | 1.7 : 1 |
| Agitation range | 10 rpm ⁓ 1500 rpm |
| Vessel inner diameter | 130 mm |
| Vessel inner height | 220 mm |
| Electrode length | 255 mm |
| Flow rate | 0 ⁓ 10 lpm |
| Aeration filter ( inlet ) | 0.2 µm |
| Pump speed range | 0 ⁓ 70 rpm |
| Thermostat system | 0 ⁓ 150 °C |
| pH range | 2 pH ⁓ 14 pH |
| Dissolved oxygen range | 0 ⁓ 200 % 0 ⁓ 20 ppm |
| ORP measuring range | -1000 mV ⁓ 1000 mV |
| Anti-foam conductivity | 0 ⁓ 300 kΩ |
| Heating resolution | ±0.1 °C |
| Motor drive | 200 W ⁓ 400 W |
| Maximum noise level | < 55 dB (A) |
| Ambient temperature | 0 ⁓ 50 °C |
| Humidity | 85 % RH |
| Display size | 7 inch |
| Power supply ( single phase ) | 110 V ⁓ 220 V, 60 Hz ⁓ 50 Hz |
| Fuse protection | 10 A |
| Dimensions | 355 × 500 × 200 mm |
| Weight | 10 kg |
Features
Control system display : Touch screen TFT LCD
Vessel material : Borosilicate glass ( Autoclavable )
Vessel top plate and fittings : Stainless steel<
Disposable hydraulic aeration filter ( Inlet )
Circulating water between double glass vessel
Standard temperature, pH, DO cascade, agitation, ORP sensors
Optional OD, O2, CO2, MFC ( Mass flow controller ) and pressure balancer sensors
Disassembled vessels allow easy input / output of accessories
Heating up to 100 ℃ with chiller system ( optional )
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
