Low speed centrifuge T-S224LSC

Introduction

Low speed centrifuge is a microcomputer controlled unit with 6000 rpm driven by brushless DC stepless speed regulation motor. Features a special key for centrifugal force through which the centrifugal force can be set or observed anytime during the process.

Applications

Used for a wide range of biomedical analysis, immunoenzyme analysis, microplate processing and cell culture applications.

Specifications

Features

Microcomputer controlled system

Driven by brushless DC stepless speed regulating motor

Automatic stop on opening of the door to ensure operational safety

AC frequency conversion motor drive

Offers nine ascending and descending rate selection modes

Offers ten different kinds of custom work mode selection

Speed/ centrifugal force can be set and double synchronous display screen

Door with double lock rod design, magnetic locks and electric door

Up to 30 grams stress tolerance with no special load balancing

FAQ

Q1: What is the maximum rotational speed of this centrifuge?
A1: The maximum speed is 4000 RPM (varies by model), such as 15000 RPM for high-speed models and 4000 RPM for low-speed models.

Q2: Does it have a refrigeration function?
A2: No, it is a non-refrigerated centrifuge - Refrigerated models can maintain a temperature range of -20°C to 40°C, while non-refrigerated models operate at ambient temperature.

Q3: What is the maximum capacity of the rotor?
A3: The standard rotor can hold 24×10ml test tubes (e.g., 12×15ml test tubes), and optional rotors are available for different tube sizes.

Q4: How to ensure the safety of centrifugation operation?
A4: It is equipped with multiple safety protections, including imbalance detection, door lock protection, and over-temperature/over-speed protection.

Q5: What is the recommended maintenance cycle?
A5: It is recommended to clean the rotor and chamber after each use, and perform a comprehensive maintenance check every 6 months (or 500 operating hours).