Batch transfer peristaltic pump

Introduction

A batch transfer peristaltic pump is a peristaltic pump designed for the batch transfer of the fluids, and it is used in the industry, the pharmaceutical, the food, the chemical, and the many other applications. The batch transfer peristaltic pump consists of a pump head with the rollers, the tubing, a drive motor, and the controls, and it pumps the fluid by the rotation of the rollers squeezing the tubing, transferring the fluid from the source container to the receiving container, with the fluid in contact only with the tubing, and it provides a gentle and a contamination-free transfer; the batch transfer peristaltic pump is used for the transfer of the liquids in the batches, for the transfer of the chemicals, for the transfer of the food and the beverages, for the pharmaceutical transfer, for the filling, and for many other applications, and it is available in various sizes and flow rates; the batch transfer peristaltic pump provides a reliable and a simple transfer of the fluids, and it is an essential equipment for the fluid transfer. Batch transfer peristaltic pumps are used in the industry, in the pharmaceutical industry, in the food industry, in the chemical industry, and for many other applications. With their batch transfer, batch transfer peristaltic pumps are essential for the fluid handling.

Batch transfer peristaltic pump LBTP-T2010

Batch transfer peristaltic pump is used for transferring fluids at higher flow rates with tube wall thickness of 4.8 mm and 6.3 mm. Equipped with flow rate of 35 L/min it works on maximu...

Send Inquiry View more

Standards

ISO/TS 6417:2025-Microfluidic pumps-Symbols and performance communication

ISO 13137:2022-Workplace atmospheres-Pumps for personal sampling of chemical and biological agents-Requirements and test methods

Complies with the above standards, but is not limited to them.

Features

1. Batch transfer peristaltic pump for controlled volume transfer of fluids in batches.

2. Programmable batch volume with automatic stop for precise fluid transfer.

3. Suitable for laboratory, pharmaceutical, food and chemical batch processing.

4. Quick-change tubing supports easy cleaning and fluid type changes between batches.

5. Includes pump head, tubing, batch controller and operation manual.

FAQ

Q1: What testing scenarios is this pump mainly applied to?

A: The batch transfer peristaltic pump is used in laboratories, pharmaceutical manufacturing, food and beverage production, chemical processing and pilot plants to transfer precise volumes of fluid in discrete batches. It supports reagent batch transfer, media filling, sample aliquoting, small-batch product transfer, formulation blending and process fluid transfer between vessels. The programmable batch volume control ensures each batch is transferred accurately and consistently, with automatic stop when the target volume is reached. The peristaltic design keeps the fluid within the tubing, preventing cross-contamination and allowing easy cleaning between batches. It is essential for laboratories and production facilities requiring accurate, repeatable batch fluid transfer with minimal cross-contamination, where consistent batch volumes are critical for product quality, process reproducibility and regulatory compliance in pharmaceutical, food, chemical and research applications.

Q2: What standards does the pump comply with?

A: The pump complies with relevant IEC 61010 laboratory electrical safety standards and GB/T standards for fluid transfer equipment. Tubing materials should meet applicable food contact or pharmaceutical standards such as FDA 21 CFR and USP Class VI for relevant applications. Batch transfer accuracy should be verified for critical applications.

Q3: What is the warranty period for the whole machine and key components?

A: The whole pump is covered by a 12-month warranty. The motor, drive, batch controller and pump head are covered, while tubing and rollers are consumables excluded from warranty. Damage from improper use or unauthorized repair is excluded.

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires basic training in batch volume setup, tubing selection and calibration. We provide an operation manual and remote guidance. Proper tubing loading, batch calibration and volume verification are important for accurate batch transfer.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular maintenance required? What is the recommended maintenance cycle?

A: Tubing should be inspected and replaced periodically. Batch transfer accuracy should be verified with a calibrated balance at regular intervals. The rollers and pump head should be maintained per the manufacturer schedule, and the controller function should be checked periodically.

Q7: Are supporting consumables universal?

A: Tubing is available from multiple suppliers, though compatibility should be verified. Long-term consumable cost is moderate depending on usage and fluid type.

Q8: Can I customize parameters or supporting accessories?

A: Customization includes batch volume range, number of channels, control interface and tubing material. Additional tubing and accessories can be ordered separately. Custom orders extend delivery lead-time.

Q9: Does the purchase include on-site installation and commissioning service?

A: No complex installation is required. The package includes the pump, tubing and instruction manual. On-site batch calibration and training service are available at additional cost for production setup.

Q10: What types of fluids are compatible with this equipment?

A: The pump transfers fluids in batches within the volume range and tubing material compatibility. Highly viscous, abrasive or corrosive fluids require appropriate tubing selection. Users should select tubing compatible with the fluid, calibrate batch volume for each fluid type, ensure proper tubing loading, and clean or change tubing between batches to prevent cross-contamination. Batch accuracy should be verified periodically, particularly when changing fluid type or tubing, to maintain consistent transfer volumes.